Custom aluminum pergola with a motorized louvered roof over a poolside patio at a Boynton Beach, Florida home
Serving Boynton Beach, FL

Aluminum Pergolas in Boynton Beach

From the Intracoastal docks of Harbor Estates to the golf-course patios of Hunters Run, AB Aluminum designs, permits, and installs custom aluminum pergolas built to outlast Boynton Beach's salt air, summer storms, and relentless sun. Free 3D design, in-house crew.

  • Licensed & Insured
  • Financing Available
  • 15+ Years
  • Free 3D Design
  • Miami-Dade HVHZ Approved
Aluminum Pergolas in Boynton Beach, Palm Beach — AB Aluminum & Screens

How much does an aluminum pergola cost in Boynton Beach?

Most aluminum pergolas in Boynton Beach run $8,700–$11,700 installed, or roughly $30 per square foot. Your final number depends on square footage, whether you pick an open-lattice, solid insulated, or motorized louvered roof, and any add-ons like lighting or screens. We give you a firm quote with free 3D design. Financing is available.

  • from $30/sq ft installed
  • 140–170 mph wind-borne debris
  • 2–4 wks typical build
  • Free 3D design

Custom Aluminum Pergola Builders Serving Boynton Beach, FL

Neighborhoods we serve: Hunters Run · Aberdeen · Leisureville · Renaissance Commons · Quantum Park · Harbor Estates · Chapel Hill · Indian Spring

Boynton Beach living means ocean breezes off the Boynton Inlet and humid salt air that drifts inland from the Intracoastal — conditions that rust steel, rot cedar, and leave vinyl chalky within a few seasons. Our pergolas are built from marine-grade aluminum and powder-coated for a finish that resists corrosion, fading, and pests. Whether you're covering a waterfront deck in Harbor Estates or a pool patio in Chapel Hill, the structure stays sharp for decades with almost no upkeep.

No two Boynton yards are the same, so we design each pergola around how you actually live outside. Pick an open-lattice roof for filtered light over a garden seating area, a solid insulated panel to keep a summer kitchen cool and dry, or a motorized louvered roof you can angle or close by remote when a Gulf Stream downpour rolls through. Every structure is engineered to your home's footprint, styled to match your elevation, and finished in the color you choose.

Because so much of Boynton Beach sits inside deed-restricted communities — Hunters Run, Aberdeen, Indian Spring, Leisureville — we handle both the city building permit and the HOA architectural-review packet, so nothing stalls your project. AB builds to Miami-Dade HVHZ product standards, the toughest in Florida, which comfortably clear Palm Beach County's wind-borne-debris requirements. In 15-plus years and 500-plus South Florida installs, we've learned that a licensed, insured, in-house crew is what keeps a job on schedule.

Most Boynton Beach pergola projects run $8,700–$11,700 installed, from about $30/sq ft — final pricing depends on size, roof style, and whether you choose a fixed or motorized louvered top. Financing is available.

Permits & engineering

Permanent aluminum pergolas in Boynton Beach require a building permit, sealed engineering, and Florida Product Approval, reviewed by the City of Boynton Beach Building Division (or Palm Beach County PZB for unincorporated parcels). Palm Beach County is a wind-borne-debris region with design winds near 165–175 mph at the coast, and every AB structure is engineered to meet or exceed that. We pull the permit for you.

Homeowners from the Intracoastal streets of Harbor Estates to the country-club patios of Aberdeen trust AB Aluminum for pergolas that hold up to Boynton Beach salt air and storm season.

15+
Years of Experience
500+
Projects Completed
3
Counties Served
100%
Licensed & Insured
Pergolas project — AB Aluminum & ScreensPergolas project — AB Aluminum & ScreensPergolas project — AB Aluminum & ScreensPergolas project — AB Aluminum & Screens

Pergola & Patio Cover Styles We Build

We design each structure to your home and how you want to use the space:

  • Attached — anchored to the home and engineered to the wall structure; best for patios right off the back of the house
  • Freestanding — stand-alone structures that anchor a pool deck, outdoor kitchen or seating area
  • Louvered (motorized) — adjustable aluminum slats that open for sun and close for rain
  • Bioclimatic / bladed — rotating louvers with smart controls and integrated drainage
Pergolas project — AB Aluminum & Screens

Why Aluminum Beats Wood & Vinyl in South Florida

South Florida’s humidity, salt air and UV are hard on outdoor structures. Powder-coated aluminum holds up where other materials don’t:

  • No rot or termites — unlike wood, aluminum won’t feed pests or break down in humidity
  • No warping or fading — holds its shape and finish under Florida UV, where vinyl discolors
  • No annual upkeep — no staining or sealing; just an occasional rinse
  • Engineered strength — a structural backbone we can rate to local wind loads
Pergolas project — AB Aluminum & Screens
Aluminum louvered pergola beside a pool in South Florida
Gallery

Recent Projects from Miami-Dade, Broward & Palm Beach

Browse recent AB Aluminum pergola installs across Boynton Beach — motorized louvered roofs over Intracoastal pool decks, solid insulated covers shading summer kitchens in Renaissance Commons, and open-lattice structures framing golf-course patios in Aberdeen and Hunters Run. Each project shows the powder-coated finishes, color options, and clean engineering you can expect on your own backyard.

Why AB Aluminum & Screens

Why South Florida Homeowners Choose Us

One licensed local team handling design, permits and installation — built to last in the South Florida climate.

  • Licensed & Insured

    A fully licensed, insured Florida contractor — your project and property are protected end to end.

  • Built to Miami-Dade HVHZ Code

    Engineered and permitted for South Florida hurricane-force winds and the Florida Building Code.

  • In-House Crew

    No subcontractors. The same team designs, engineers and installs every project.

  • Free 3D Design

    See a realistic 3D rendering and a clear quote before anything is built — at no cost.

  • 15+ Years of Experience

    Hundreds of pergolas, enclosures and screen rooms installed across the tri-county area.

  • Financing Available

    Build now and pay over time with flexible monthly plans through Synchrony Bank.

Our Process

Our 3-Step Process: Consultation, 3D Design, Installation

  1. 01

    Free Consultation

    We visit your property, take measurements and learn how you want to use the space.

  2. 02

    Custom 3D Design

    You see a realistic 3D rendering and a clear quote before anything is built.

  3. 03

    Permits & Installation

    We pull the permits and our licensed crew installs to Florida Building Code.

Aluminum patio cover beside a pool with palm trees in South Florida
Financing

Financing for your outdoor living project through Synchrony Bank

Build now and pay over time with flexible monthly payments and no upfront cost. Fast approval through our trusted partner, Synchrony Bank.

Learn about financing
Reviews & Testimonials

What our clients say about our work!

4.9 Based on Google reviews
From the 3D design to the final install, the team was professional and on time. Our aluminum pergola completely transformed the backyard.
Maria G. Pinecrest, FL
They handled the permits and HOA approval for us. The louvered roof is built like a tank and looks incredible.
David R. Weston, FL
Our pool screen enclosure is exactly what we wanted — no more bugs and easy to maintain. Highly recommend AB Aluminum.
Jennifer M. Coral Gables, FL

Frequently Asked Questions

Do I need a permit for a pergola in Boynton Beach?

Yes. A permanent aluminum pergola requires a building permit with sealed engineering and Florida Product Approval, reviewed by the City of Boynton Beach Building Division (or Palm Beach County PZB for unincorporated addresses). We prepare the drawings and pull the permit for you.

What about HOA approval in communities like Hunters Run or Aberdeen?

Many Boynton Beach neighborhoods — Hunters Run, Aberdeen, Indian Spring, Leisureville — require architectural-review board sign-off before construction. We provide stamped plans, elevation drawings, and color specs formatted for your ARB packet, and we can submit alongside the city permit to keep everything moving.

Will an aluminum pergola hold up to Boynton Beach salt air?

Yes. Homes near the Boynton Inlet, the Intracoastal, and Harbor Estates deal with constant salt spray. Our marine-grade aluminum and powder-coated finish resist corrosion far better than steel or wood, so the frame stays solid and good-looking for decades with minimal maintenance.

Are your pergolas built for hurricane-force winds?

They're engineered for it. Palm Beach County is a wind-borne-debris region with coastal design winds around 165–175 mph, and AB builds to Miami-Dade HVHZ product standards — the strictest in the state — so your pergola is rated to exceed local code.

Get your free 3D design & estimate

Let's talk about your outdoor project — no obligation, usually a response within 24 hours.

Get Your Free 3D Design & Quote

Tell us about your project and we’ll get back to you within 24 hours.

  • Licensed & Insured
  • 15+ Years
  • 500+ Projects
  • Google Reviews
  • Custom aluminum pergola & patio cover in South Florida
  • Custom aluminum pergola & patio cover in South Florida
  • Custom aluminum pergola & patio cover in South Florida
Get a Free Quote

No obligation · Free 3D design · Financing via Synchrony Bank

(786) 383-6066 EN · (786) 340-5157 ES