Custom aluminum pergola on a Brickell high-rise terrace overlooking Biscayne Bay
Serving Brickell, FL

Aluminum Pergolas in Brickell

Turn your Brickell terrace or rooftop deck into shaded, usable space with a custom aluminum pergola built for bayfront wind and salt air. We handle 3D design, City of Miami permits, and marine-grade installation from Brickell Key to Mary Brickell Village.

  • Licensed & Insured
  • Financing Available
  • 15+ Years
  • Free 3D Design
  • Miami-Dade HVHZ Approved
Aluminum Pergolas in Brickell, Miami-Dade — AB Aluminum & Screens

How much does an aluminum pergola cost in Brickell?

Most aluminum pergolas in Brickell run $8,700–$11,700 installed, or about $30 per square foot. Your final price depends on the footprint, whether you choose open-lattice, solid insulated, or motorized louvered roofing, and how tricky terrace or rooftop access is in your building. We give you a fixed quote with your free 3D design.

  • from $30/sq ft installed
  • 175 mph HVHZ wind-rated
  • 2–4 wks typical build
  • Free 3D design

Custom Aluminum Pergola Builders Serving Brickell, Miami

Neighborhoods we serve: Brickell Key · Mary Brickell Village · Brickell Avenue · Brickell City Centre · Point View · The Roads

Brickell sits right on Biscayne Bay, where salt-laden breezes off the water corrode ordinary metal and rot wood within a few seasons. Every pergola we build starts with marine-grade aluminum, then gets powder-coated to seal out that coastal moisture for good. On an exposed balcony above Brickell Avenue or a townhome patio near the Miami River, the finish holds its color and never rusts, warps, or needs the yearly refinishing that timber demands.

Most Brickell living happens up high, so we engineer for it. Rooftop amenity decks, penthouse terraces, and balcony installations face far stronger wind loads than a ground-level yard, and Miami-Dade's High-Velocity Hurricane Zone requires every structure to be sealed to 175-mph standards. Our crews anchor into concrete slabs and parapets correctly, coordinate with your building's management, and deliver engineering your condo association and the City of Miami will both sign off on.

Because Brickell terraces are tight and design-forward, we build to fit. Choose an open-lattice roof to frame the skyline, a solid insulated panel to block afternoon glare off neighboring glass towers, or motorized louvered slats you tilt open for a Biscayne breeze and close before a squall rolls in. Every structure is measured on-site and rendered in 3D first, so you see exactly how it sits against your view before a single bracket is set.

Most Brickell pergola projects run $8,700–$11,700 installed, or roughly $30 per square foot depending on size, roof style, and terrace access. Financing is available, and your free 3D design comes with a fixed quote.

Permits & engineering

Yes — a permanent aluminum pergola in Brickell needs a permit. Because you're inside the City of Miami and Miami-Dade County's High-Velocity Hurricane Zone, the project requires sealed engineering and a Miami-Dade NOA (Notice of Acceptance) product approval rated to 175-mph winds, submitted to the City of Miami Building Department. We prepare the drawings, pull the permit, and schedule inspections for you.

With 15+ years and 500+ completed structures across South Florida, our in-house crews know Brickell's high-rise access rules, loading-dock schedules, and condo-board expectations — no subcontractors guessing on-site.

15+
Years of Experience
500+
Projects Completed
3
Counties Served
100%
Licensed & Insured
Pergolas project — AB Aluminum & ScreensPergolas project — AB Aluminum & ScreensWhite aluminum open-lattice pergola at South Florida residential home, patio cover with tropical garden and palm trees — AB Aluminum & ScreensPergolas project — AB Aluminum & Screens

Pergola & Patio Cover Styles We Build

We design each structure to your home and how you want to use the space:

  • Attached — anchored to the home and engineered to the wall structure; best for patios right off the back of the house
  • Freestanding — stand-alone structures that anchor a pool deck, outdoor kitchen or seating area
  • Louvered (motorized) — adjustable aluminum slats that open for sun and close for rain
  • Bioclimatic / bladed — rotating louvers with smart controls and integrated drainage
Pergolas project — AB Aluminum & Screens

Why Aluminum Beats Wood & Vinyl in South Florida

South Florida’s humidity, salt air and UV are hard on outdoor structures. Powder-coated aluminum holds up where other materials don’t:

  • No rot or termites — unlike wood, aluminum won’t feed pests or break down in humidity
  • No warping or fading — holds its shape and finish under Florida UV, where vinyl discolors
  • No annual upkeep — no staining or sealing; just an occasional rinse
  • Engineered strength — a structural backbone we can rate to local wind loads
Pergolas project — AB Aluminum & Screens
Aluminum louvered pergola beside a pool in South Florida
Gallery

Recent Projects from Miami-Dade, Broward & Palm Beach

These are aluminum pergolas we've designed and installed on terraces, rooftop decks, and townhome patios across Miami and Brickell. Notice how each powder-coated finish and roof style is matched to the home's architecture and its exposure to Biscayne Bay — from sleek open-lattice frames on high-rise balconies to motorized louvered covers built for full sun-and-shade control. Yours would be measured, rendered in 3D, and engineered specifically for your space.

Why AB Aluminum & Screens

Why South Florida Homeowners Choose Us

One licensed local team handling design, permits and installation — built to last in the South Florida climate.

  • Licensed & Insured

    A fully licensed, insured Florida contractor — your project and property are protected end to end.

  • Built to Miami-Dade HVHZ Code

    Engineered and permitted for South Florida hurricane-force winds and the Florida Building Code.

  • In-House Crew

    No subcontractors. The same team designs, engineers and installs every project.

  • Free 3D Design

    See a realistic 3D rendering and a clear quote before anything is built — at no cost.

  • 15+ Years of Experience

    Hundreds of pergolas, enclosures and screen rooms installed across the tri-county area.

  • Financing Available

    Build now and pay over time with flexible monthly plans through Synchrony Bank.

Our Process

Our 3-Step Process: Consultation, 3D Design, Installation

  1. 01

    Free Consultation

    We visit your property, take measurements and learn how you want to use the space.

  2. 02

    Custom 3D Design

    You see a realistic 3D rendering and a clear quote before anything is built.

  3. 03

    Permits & Installation

    We pull the permits and our licensed crew installs to Florida Building Code.

Aluminum patio cover beside a pool with palm trees in South Florida
Financing

Financing for your outdoor living project through Synchrony Bank

Build now and pay over time with flexible monthly payments and no upfront cost. Fast approval through our trusted partner, Synchrony Bank.

Learn about financing
Reviews & Testimonials

What our clients say about our work!

4.9 Based on Google reviews
From the 3D design to the final install, the team was professional and on time. Our aluminum pergola completely transformed the backyard.
Maria G. Pinecrest, FL
They handled the permits and HOA approval for us. The louvered roof is built like a tank and looks incredible.
David R. Weston, FL
Our pool screen enclosure is exactly what we wanted — no more bugs and easy to maintain. Highly recommend AB Aluminum.
Jennifer M. Coral Gables, FL

Frequently Asked Questions

Do I need a permit for a pergola in Brickell?

Yes. Any permanent aluminum pergola in Brickell requires a permit through the City of Miami Building Department, plus sealed engineering and Miami-Dade NOA product approval rated to 175-mph winds. We handle the drawings, submittal, and inspections so you don't have to.

Will my condo or building association approve a rooftop or balcony pergola?

Most Brickell towers require board or management approval before any terrace structure. We provide stamped engineering, product data, and renderings formatted for architectural review, and we coordinate installation around your building's access and elevator rules.

Is aluminum better than wood for a bayfront Brickell terrace?

On Biscayne Bay, salt air destroys wood and rusts steel fast. Our powder-coated marine-grade aluminum resists corrosion, won't warp or splinter, and keeps its finish for decades — ideal for exposed balconies and rooftop decks facing the water.

What roof options and features can I add?

Choose open-lattice for filtered light, solid insulated panels for full shade and rain protection, or motorized louvered roofing you adjust by remote. Integrated LED lighting, fans, and rain sensors are popular add-ons for Brickell entertaining terraces.

Get your free 3D design & estimate

Let's talk about your outdoor project — no obligation, usually a response within 24 hours.

Get Your Free 3D Design & Quote

Tell us about your project and we’ll get back to you within 24 hours.

  • Licensed & Insured
  • 15+ Years
  • 500+ Projects
  • Google Reviews
  • Custom aluminum pergola & patio cover in South Florida
  • Custom aluminum pergola & patio cover in South Florida
  • Custom aluminum pergola & patio cover in South Florida
Get a Free Quote

No obligation · Free 3D design · Financing via Synchrony Bank

(786) 383-6066 EN · (786) 340-5157 ES