Custom powder-coated aluminum pergola shading a canal-front patio in Deerfield Beach, Florida
Serving Deerfield Beach, FL

Aluminum Pergolas in Deerfield Beach

From canal-front homes in The Cove to the golf villas of Deer Creek, we design, permit, and install custom aluminum pergolas built for Deerfield Beach's salt air and summer sun — engineered, powder-coated, and installed by our own crew.

  • Licensed & Insured
  • Financing Available
  • 15+ Years
  • Free 3D Design
  • Miami-Dade HVHZ Approved
Aluminum Pergolas in Deerfield Beach, Broward — AB Aluminum & Screens

How much does an aluminum pergola cost in Deerfield Beach?

Most aluminum pergolas in Deerfield Beach fall between $8,700–$11,700 installed, roughly $30 per square foot. Your final price depends on the footprint, the roof you pick — open-lattice, solid insulated, or motorized louvered — and any HVHZ engineering your site needs. Every quote includes permitting, sealed drawings, and installation by our own crew.

  • from $30/sq ft installed
  • 175 mph HVHZ wind-rated
  • 2–4 wks typical build
  • Free 3D design

Custom Aluminum Pergola Builders Serving Deerfield Beach, FL

Neighborhoods we serve: The Cove · Deer Creek · Century Village · Waterways · Independence Bay · Deerfield Beach Historic District · Crystal Lake · Natura

Living a few blocks from the Atlantic has a cost: salt spray drifts inland off the beach and the Intracoastal, and it eats ordinary patio structures alive. Wood swells and rots, and untreated steel streaks with rust within a season. Our pergolas start with marine-grade aluminum finished in a baked-on powder coat, so a cover shading your dock in The Cove or a pool deck near Cove Marina resists corrosion and holds its color for decades.

No two Deerfield yards call for the same roof. Over a beachside patio near the Deerfield Beach Pier, an open-lattice top throws striped shade and lets the ocean breeze through. Families in Waterways or Independence Bay often choose a solid insulated panel that stays cool and keeps afternoon storms off the grill. And for full control, our motorized louvered roofs tilt open for sun or close tight at the first drop of rain — every one sized to your home in our free 3D design.

Broward sits inside Florida's High-Velocity Hurricane Zone, so a permanent pergola here isn't a weekend project — it needs sealed engineering, product approvals, and a permit before a single post goes in. We handle all of it: we pull the permit through the City of Deerfield Beach Building Division, submit the wind-load calculations, and, for gated communities like Deer Creek or Century Village, prepare the drawings your HOA architectural board expects. You get one licensed crew from design through final inspection.

Most Deerfield Beach pergola projects run $8,700–$11,700 installed, or about $30/sq ft, depending on size, roof style, and whether you choose open-lattice, solid insulated, or motorized louvered panels. Your free 3D design comes with an exact quote.

Permits & engineering

Yes — in Deerfield Beach a permanent aluminum pergola requires a building permit with sealed engineering. Because Broward County is a High-Velocity Hurricane Zone, every structure must carry a Miami-Dade NOA or Florida Product Approval and be engineered to withstand 175 mph winds. We pull the permit through the City of Deerfield Beach Building Division and manage inspections for you.

With 15+ years and 500+ pergolas across South Florida — from beachside patios off A1A to gated golf communities inland — our in-house crew knows exactly what Broward inspectors and Deerfield HOAs look for. Licensed, insured, and financing available.

15+
Years of Experience
500+
Projects Completed
3
Counties Served
100%
Licensed & Insured
Dark gray aluminum solid-roof patio cover under-ceiling view with recessed LED lighting, pool fence visible beyond, South Florida suburban home — AB Aluminum & ScreensPergolas project — AB Aluminum & ScreensWhite aluminum open-lattice pergola attached to South Florida residential home, tropical backyard with palm trees and lush garden landscaping — AB Aluminum & ScreensPergolas project — AB Aluminum & Screens

Pergola & Patio Cover Styles We Build

We design each structure to your home and how you want to use the space:

  • Attached — anchored to the home and engineered to the wall structure; best for patios right off the back of the house
  • Freestanding — stand-alone structures that anchor a pool deck, outdoor kitchen or seating area
  • Louvered (motorized) — adjustable aluminum slats that open for sun and close for rain
  • Bioclimatic / bladed — rotating louvers with smart controls and integrated drainage
Pergolas project — AB Aluminum & Screens

Why Aluminum Beats Wood & Vinyl in South Florida

South Florida’s humidity, salt air and UV are hard on outdoor structures. Powder-coated aluminum holds up where other materials don’t:

  • No rot or termites — unlike wood, aluminum won’t feed pests or break down in humidity
  • No warping or fading — holds its shape and finish under Florida UV, where vinyl discolors
  • No annual upkeep — no staining or sealing; just an occasional rinse
  • Engineered strength — a structural backbone we can rate to local wind loads
Pergolas project — AB Aluminum & Screens
Aluminum louvered pergola beside a pool in South Florida
Gallery

Recent Projects from Miami-Dade, Broward & Palm Beach

Browse recent aluminum pergola installs around Deerfield Beach — canal-front covers in The Cove, poolside louvered roofs in Deer Creek, and shaded patios steps from the pier. Each was engineered to Broward's 175 mph HVHZ standard, powder-coated to fight salt-air corrosion, and finished by our own crew. Picture the same clean lines over your patio, and let's design yours.

Why AB Aluminum & Screens

Why South Florida Homeowners Choose Us

One licensed local team handling design, permits and installation — built to last in the South Florida climate.

  • Licensed & Insured

    A fully licensed, insured Florida contractor — your project and property are protected end to end.

  • Built to Miami-Dade HVHZ Code

    Engineered and permitted for South Florida hurricane-force winds and the Florida Building Code.

  • In-House Crew

    No subcontractors. The same team designs, engineers and installs every project.

  • Free 3D Design

    See a realistic 3D rendering and a clear quote before anything is built — at no cost.

  • 15+ Years of Experience

    Hundreds of pergolas, enclosures and screen rooms installed across the tri-county area.

  • Financing Available

    Build now and pay over time with flexible monthly plans through Synchrony Bank.

Our Process

Our 3-Step Process: Consultation, 3D Design, Installation

  1. 01

    Free Consultation

    We visit your property, take measurements and learn how you want to use the space.

  2. 02

    Custom 3D Design

    You see a realistic 3D rendering and a clear quote before anything is built.

  3. 03

    Permits & Installation

    We pull the permits and our licensed crew installs to Florida Building Code.

Aluminum patio cover beside a pool with palm trees in South Florida
Financing

Financing for your outdoor living project through Synchrony Bank

Build now and pay over time with flexible monthly payments and no upfront cost. Fast approval through our trusted partner, Synchrony Bank.

Learn about financing
Reviews & Testimonials

What our clients say about our work!

4.9 Based on Google reviews
From the 3D design to the final install, the team was professional and on time. Our aluminum pergola completely transformed the backyard.
Maria G. Pinecrest, FL
They handled the permits and HOA approval for us. The louvered roof is built like a tank and looks incredible.
David R. Weston, FL
Our pool screen enclosure is exactly what we wanted — no more bugs and easy to maintain. Highly recommend AB Aluminum.
Jennifer M. Coral Gables, FL

Frequently Asked Questions

Do I need a permit for a pergola in Deerfield Beach?

Yes. A permanent aluminum pergola requires a building permit from the City of Deerfield Beach Building Division, along with sealed structural drawings. Because Broward County is an HVHZ, your pergola must meet 175 mph wind ratings and carry a Miami-Dade NOA or Florida Product Approval. We handle the entire permit and inspection process.

Will an aluminum pergola hold up to the salt air near the beach?

That's exactly what it's built for. Homes near the pier, A1A, and the Intracoastal in The Cove get constant salt exposure that corrodes wood and steel. Our marine-grade aluminum wears a baked-on powder coat that resists salt, rust, and UV fading, so it stays solid and sharp-looking for decades with almost no upkeep.

My community has an HOA — can you handle the architectural approval?

Yes. Gated Deerfield Beach communities like Deer Creek, Natura, and Century Village require architectural review before you build. We prepare the site plans, elevations, and color specs your HOA or ARB needs for approval, then coordinate the city permit once you're cleared — so you're not chasing paperwork between two offices.

How long does a pergola project take from design to install?

After your free 3D design and quote, most Deerfield Beach projects take a few weeks. HVHZ engineering and city permit review account for much of that timeline, followed by one to three days of on-site installation by our own crew. We keep you updated at every step, from drawings to final inspection.

Get your free 3D design & estimate

Let's talk about your outdoor project — no obligation, usually a response within 24 hours.

Get Your Free 3D Design & Quote

Tell us about your project and we’ll get back to you within 24 hours.

  • Licensed & Insured
  • 15+ Years
  • 500+ Projects
  • Google Reviews
  • Custom aluminum pergola & patio cover in South Florida
  • Custom aluminum pergola & patio cover in South Florida
  • Custom aluminum pergola & patio cover in South Florida
Get a Free Quote

No obligation · Free 3D design · Financing via Synchrony Bank

(786) 383-6066 EN · (786) 340-5157 ES