Powder-coated aluminum pergola over a waterfront patio in Fort Lauderdale, Florida
Serving Fort Lauderdale, FL

Aluminum Pergolas in Fort Lauderdale

Custom aluminum pergolas built for Fort Lauderdale's waterfront lots and salt-heavy air. From Las Olas to Coral Ridge, we design, permit, and install marine-grade, powder-coated structures rated for 175 mph winds — with a free 3D design and financing available.

  • Licensed & Insured
  • Financing Available
  • 15+ Years
  • Free 3D Design
  • Miami-Dade HVHZ Approved
Aluminum Pergolas in Fort Lauderdale, Broward — AB Aluminum & Screens

How much does an aluminum pergola cost in Fort Lauderdale?

Most aluminum pergolas in Fort Lauderdale run $8,700–$11,700 installed, or roughly $30 per square foot. The final number depends on size, whether you choose an open-lattice, solid insulated, or motorized louvered roof, and your site's access. Permitting and sealed HVHZ engineering are included, and financing is available.

  • from $30/sq ft installed
  • 175 mph HVHZ wind-rated
  • 2–4 wks typical build
  • Free 3D design

Custom Aluminum Pergola Builders Serving Fort Lauderdale, FL

Neighborhoods we serve: Las Olas Isles · Victoria Park · Rio Vista · Coral Ridge · Colee Hammock · Harbor Beach · Imperial Point · Sailboat Bend

Fort Lauderdale living happens outdoors, and so does the corrosion. Salt air rolling off the Atlantic and the miles of canals that earned the city its 'Venice of America' nickname will eat through untreated metal and rot wood in a few seasons. Every pergola we build starts with marine-grade aluminum, then gets a powder-coated finish that resists pitting, chalking, and rust — so a structure on a Las Olas Isles seawall looks as sharp in year fifteen as it did on install day.

No two Fort Lauderdale backyards ask for the same structure. A waterfront patio in Rio Vista or Harbor Beach might call for a motorized louvered roof you can close when an afternoon squall blows in off the Intracoastal, while a shaded courtyard in Victoria Park or Colee Hammock may only need an open-lattice frame for filtered light. We handle open-lattice, solid insulated, and louvered options, then dial in the span, color, and post placement to match your home and lot.

Because Broward sits inside the High-Velocity Hurricane Zone, a permanent pergola here isn't a weekend project — it's a permitted, engineered structure rated for 175 mph winds. We pull the permit through the City of Fort Lauderdale building department, supply the sealed engineering and Florida Product Approval, and coordinate the inspections. Our in-house crew does the install, so you're never handed off to a subcontractor. Financing is available, and a free 3D design shows you the finished structure before we break ground.

Most Fort Lauderdale pergola projects run $8,700–$11,700 installed, or about $30/sq ft, depending on size, roof style, and site access. Your free 3D design comes with an itemized quote — no surprises.

Permits & engineering

In Fort Lauderdale, a permanent aluminum pergola requires a building permit with sealed engineering and a Miami-Dade NOA or Florida Product Approval, designed to Broward's 175 mph High-Velocity Hurricane Zone standard. Permits are issued by the City of Fort Lauderdale Building Division (or Broward County). We handle the drawings, submittals, and inspections for you.

We've built pergolas and patio covers across Fort Lauderdale — from canal-front homes in Las Olas Isles and Rio Vista to Coral Ridge, Victoria Park, and Imperial Point — matching each to its lot, HOA guidelines, and exposure.

15+
Years of Experience
500+
Projects Completed
3
Counties Served
100%
Licensed & Insured
Pergolas project — AB Aluminum & ScreensPergolas project — AB Aluminum & ScreensDark gray aluminum solid-roof patio cover under-ceiling view with recessed LED lighting, pool fence visible beyond, South Florida suburban home — AB Aluminum & ScreensPergolas project — AB Aluminum & Screens

Pergola & Patio Cover Styles We Build

We design each structure to your home and how you want to use the space:

  • Attached — anchored to the home and engineered to the wall structure; best for patios right off the back of the house
  • Freestanding — stand-alone structures that anchor a pool deck, outdoor kitchen or seating area
  • Louvered (motorized) — adjustable aluminum slats that open for sun and close for rain
  • Bioclimatic / bladed — rotating louvers with smart controls and integrated drainage
Pergolas project — AB Aluminum & Screens

Why Aluminum Beats Wood & Vinyl in South Florida

South Florida’s humidity, salt air and UV are hard on outdoor structures. Powder-coated aluminum holds up where other materials don’t:

  • No rot or termites — unlike wood, aluminum won’t feed pests or break down in humidity
  • No warping or fading — holds its shape and finish under Florida UV, where vinyl discolors
  • No annual upkeep — no staining or sealing; just an occasional rinse
  • Engineered strength — a structural backbone we can rate to local wind loads
Pergolas project — AB Aluminum & Screens
Aluminum louvered pergola beside a pool in South Florida
Gallery

Recent Projects from Miami-Dade, Broward & Palm Beach

Browse aluminum pergolas we've designed and installed around Fort Lauderdale — motorized louvered roofs over Intracoastal-facing pool decks, open-lattice frames shading Las Olas courtyards, and solid insulated covers on Coral Ridge patios. Every project is powder-coated marine-grade aluminum, permitted, and engineered for Broward's 175 mph wind code.

Why AB Aluminum & Screens

Why South Florida Homeowners Choose Us

One licensed local team handling design, permits and installation — built to last in the South Florida climate.

  • Licensed & Insured

    A fully licensed, insured Florida contractor — your project and property are protected end to end.

  • Built to Miami-Dade HVHZ Code

    Engineered and permitted for South Florida hurricane-force winds and the Florida Building Code.

  • In-House Crew

    No subcontractors. The same team designs, engineers and installs every project.

  • Free 3D Design

    See a realistic 3D rendering and a clear quote before anything is built — at no cost.

  • 15+ Years of Experience

    Hundreds of pergolas, enclosures and screen rooms installed across the tri-county area.

  • Financing Available

    Build now and pay over time with flexible monthly plans through Synchrony Bank.

Our Process

Our 3-Step Process: Consultation, 3D Design, Installation

  1. 01

    Free Consultation

    We visit your property, take measurements and learn how you want to use the space.

  2. 02

    Custom 3D Design

    You see a realistic 3D rendering and a clear quote before anything is built.

  3. 03

    Permits & Installation

    We pull the permits and our licensed crew installs to Florida Building Code.

Aluminum patio cover beside a pool with palm trees in South Florida
Financing

Financing for your outdoor living project through Synchrony Bank

Build now and pay over time with flexible monthly payments and no upfront cost. Fast approval through our trusted partner, Synchrony Bank.

Learn about financing
Reviews & Testimonials

What our clients say about our work!

4.9 Based on Google reviews
From the 3D design to the final install, the team was professional and on time. Our aluminum pergola completely transformed the backyard.
Maria G. Pinecrest, FL
They handled the permits and HOA approval for us. The louvered roof is built like a tank and looks incredible.
David R. Weston, FL
Our pool screen enclosure is exactly what we wanted — no more bugs and easy to maintain. Highly recommend AB Aluminum.
Jennifer M. Coral Gables, FL

Frequently Asked Questions

Do I need a permit for a pergola in Fort Lauderdale?

Yes. Any permanent pergola in Fort Lauderdale needs a building permit with sealed engineering and Florida Product Approval or a Miami-Dade NOA, because Broward County is a High-Velocity Hurricane Zone. Permits go through the City of Fort Lauderdale Building Division. We prepare the drawings and manage every inspection.

Will an aluminum pergola hold up near the water in Fort Lauderdale?

That's exactly what it's built for. With hundreds of miles of canals and the Intracoastal running through town, salt exposure is constant. Our marine-grade aluminum and powder-coated finish resist corrosion far better than wood or standard steel, so waterfront structures in areas like Harbor Beach or Las Olas Isles stay solid for decades.

What wind rating do pergolas in Broward County need?

Broward sits in the High-Velocity Hurricane Zone, so permanent structures must be engineered to withstand 175 mph winds. Every pergola we install is designed and sealed to that standard, with Florida Product Approval, so it passes inspection and stands up to hurricane season.

How long does a pergola project take from design to install?

Most Fort Lauderdale projects run four to eight weeks. That covers the free 3D design, engineering, and permitting through the city or Broward County — which is the longest stretch — followed by a quick in-house install once approvals and any HOA architectural review clear.

Get your free 3D design & estimate

Let's talk about your outdoor project — no obligation, usually a response within 24 hours.

Get Your Free 3D Design & Quote

Tell us about your project and we’ll get back to you within 24 hours.

  • Licensed & Insured
  • 15+ Years
  • 500+ Projects
  • Google Reviews
  • Custom aluminum pergola & patio cover in South Florida
  • Custom aluminum pergola & patio cover in South Florida
  • Custom aluminum pergola & patio cover in South Florida
Get a Free Quote

No obligation · Free 3D design · Financing via Synchrony Bank

(786) 383-6066 EN · (786) 340-5157 ES