Custom aluminum pergola over a pool patio at a Parkland, FL home
Serving Parkland, FL

Aluminum Pergolas in Parkland

Parkland's big, tree-shaded lots deserve outdoor living that lasts. We design, engineer, and install custom aluminum pergolas built for Broward's intense sun and summer storms — powder-coated, HOA-ready, and permitted for you from first sketch to final inspection.

  • Licensed & Insured
  • Financing Available
  • 15+ Years
  • Free 3D Design
  • Miami-Dade HVHZ Approved
Aluminum Pergolas in Parkland, Broward — AB Aluminum & Screens

How much does an aluminum pergola cost in Parkland?

Most aluminum pergolas in Parkland run $8,700–$11,700 installed, roughly $30 per square foot. The final number depends on footprint, roof choice — open-lattice, solid insulated, or motorized louvered — and extras like integrated lighting or hurricane-rated screening. Every quote includes sealed engineering, the city permit, and installation by our own crew, with financing available.

  • from $30/sq ft installed
  • 175 mph HVHZ wind-rated
  • 2–4 wks typical build
  • Free 3D design

Custom Aluminum Pergola Builders Serving Parkland, FL

Neighborhoods we serve: Heron Bay · Parkland Golf & Country Club · Parkland Isles · Cascata · MiraLago · Ternbridge · Cypress Cay · Meadow Run

Set well inland in northwest Broward, Parkland skips the salt spray but bakes under some of South Florida's most punishing sun. Wood pergolas gray and split here; vinyl chalks and sags. Ours are built from powder-coated, marine-grade aluminum that reflects heat, resists fading, and never rots — so a cover shading a pool deck in Heron Bay or a paver patio in Parkland Golf & Country Club still looks crisp a decade later, with almost no upkeep beyond an occasional rinse.

Every Parkland home has a different footprint, so we tailor each pergola to yours. Choose an open-lattice roof for filtered light and airflow, a solid insulated panel that keeps rain and heat off a summer kitchen, or a motorized louvered roof you tilt open on a clear evening and close the instant a storm rolls in off the Everglades. Our free 3D design shows you exactly how the structure frames your patio, spa, or outdoor lounge before we build.

Parkland is a city of master-planned, gated communities, and nearly every one has an architectural review board with firm rules on height, color, and setbacks. We handle that. From gathering approvals in communities like Cascata, Parkland Isles, or MiraLago to pulling the city permit and sealed engineering, our in-house crew manages the whole process. With 15+ years and 500+ South Florida projects, we install to Broward's 175 mph HVHZ standard and leave your yard clean.

Most Parkland pergola projects run $8,700–$11,700 installed, or about $30/sq ft, depending on size, roof style, and whether you add motorized louvers, lighting, or a summer-kitchen framework. Your free 3D design comes with an itemized quote, and financing is available.

Permits & engineering

Yes — a permanent aluminum pergola in Parkland requires a building permit with sealed engineering. Because Broward County sits in the High-Velocity Hurricane Zone, your structure must carry a Miami-Dade NOA or Florida Product Approval and be engineered to withstand 175 mph winds. We submit through the City of Parkland Building Division and handle every inspection for you.

From filtered-shade lattice covers on Parkland Isles pool decks to motorized louvered roofs over summer kitchens in Heron Bay, we've built outdoor living across Parkland's gated communities — permitted, engineered, and finished by our own crew.

15+
Years of Experience
500+
Projects Completed
3
Counties Served
100%
Licensed & Insured
Pergolas project — AB Aluminum & ScreensWhite aluminum pergola with open lattice roof, backyard installation at South Florida home with tropical plants and patio area — AB Aluminum & ScreensDark gray aluminum solid-roof patio cover under-ceiling view with recessed LED lighting, pool fence visible beyond, South Florida suburban home — AB Aluminum & ScreensPergolas project — AB Aluminum & Screens

Pergola & Patio Cover Styles We Build

We design each structure to your home and how you want to use the space:

  • Attached — anchored to the home and engineered to the wall structure; best for patios right off the back of the house
  • Freestanding — stand-alone structures that anchor a pool deck, outdoor kitchen or seating area
  • Louvered (motorized) — adjustable aluminum slats that open for sun and close for rain
  • Bioclimatic / bladed — rotating louvers with smart controls and integrated drainage
White aluminum open-lattice pergola attached to Mediterranean South Florida home with arched window, terracotta tile roof, lush tropical backyard — AB Aluminum & Screens

Why Aluminum Beats Wood & Vinyl in South Florida

South Florida’s humidity, salt air and UV are hard on outdoor structures. Powder-coated aluminum holds up where other materials don’t:

  • No rot or termites — unlike wood, aluminum won’t feed pests or break down in humidity
  • No warping or fading — holds its shape and finish under Florida UV, where vinyl discolors
  • No annual upkeep — no staining or sealing; just an occasional rinse
  • Engineered strength — a structural backbone we can rate to local wind loads
Pergolas project — AB Aluminum & Screens
Aluminum louvered pergola beside a pool in South Florida
Gallery

Recent Projects from Miami-Dade, Broward & Palm Beach

Browse aluminum pergolas we've designed and installed across Parkland and northwest Broward — open-lattice covers filtering afternoon sun over paver patios, solid insulated roofs sheltering summer kitchens, and sleek motorized louvered structures on gated-community pool decks. Each one is powder-coated to order, engineered to 175 mph, and built to look at home in Parkland's tree-lined neighborhoods for decades.

Why AB Aluminum & Screens

Why South Florida Homeowners Choose Us

One licensed local team handling design, permits and installation — built to last in the South Florida climate.

  • Licensed & Insured

    A fully licensed, insured Florida contractor — your project and property are protected end to end.

  • Built to Miami-Dade HVHZ Code

    Engineered and permitted for South Florida hurricane-force winds and the Florida Building Code.

  • In-House Crew

    No subcontractors. The same team designs, engineers and installs every project.

  • Free 3D Design

    See a realistic 3D rendering and a clear quote before anything is built — at no cost.

  • 15+ Years of Experience

    Hundreds of pergolas, enclosures and screen rooms installed across the tri-county area.

  • Financing Available

    Build now and pay over time with flexible monthly plans through Synchrony Bank.

Our Process

Our 3-Step Process: Consultation, 3D Design, Installation

  1. 01

    Free Consultation

    We visit your property, take measurements and learn how you want to use the space.

  2. 02

    Custom 3D Design

    You see a realistic 3D rendering and a clear quote before anything is built.

  3. 03

    Permits & Installation

    We pull the permits and our licensed crew installs to Florida Building Code.

Aluminum patio cover beside a pool with palm trees in South Florida
Financing

Financing for your outdoor living project through Synchrony Bank

Build now and pay over time with flexible monthly payments and no upfront cost. Fast approval through our trusted partner, Synchrony Bank.

Learn about financing
Reviews & Testimonials

What our clients say about our work!

4.9 Based on Google reviews
From the 3D design to the final install, the team was professional and on time. Our aluminum pergola completely transformed the backyard.
Maria G. Pinecrest, FL
They handled the permits and HOA approval for us. The louvered roof is built like a tank and looks incredible.
David R. Weston, FL
Our pool screen enclosure is exactly what we wanted — no more bugs and easy to maintain. Highly recommend AB Aluminum.
Jennifer M. Coral Gables, FL

Frequently Asked Questions

Do I need a permit for a pergola in Parkland?

Yes. Any permanent aluminum pergola in Parkland needs a building permit with sealed structural engineering. Broward County is a High-Velocity Hurricane Zone, so your cover must meet Miami-Dade NOA or Florida Product Approval and 175 mph wind loads. We prepare the drawings, submit to the City of Parkland Building Division, and manage inspections.

Will my Parkland HOA or ARB approve an aluminum pergola?

Almost certainly, with the right submittal. Gated communities like Heron Bay, Cascata, and Parkland Golf & Country Club run architectural review boards that scrutinize height, color, and placement. We provide the drawings, product specs, and color samples your ARB needs and match the pergola to your home's style so approval goes smoothly.

Is aluminum better than wood for Parkland's climate?

For Parkland's inland heat and heavy UV, yes. Powder-coated aluminum won't warp, rot, or attract termites the way wood does, and it shrugs off the intense sun that fades and cracks other materials. It also stands up to Broward's summer storms far better, all while needing almost no maintenance.

What roof styles do you offer, and can I get a motorized louvered roof?

We install three: open-lattice for dappled shade and breeze, solid insulated panels for full rain-and-sun protection, and motorized louvered roofs that pivot from open sky to weathertight at the touch of a button. Louvered roofs are popular over Parkland pool decks and summer kitchens, and financing makes the upgrade easy.

Get your free 3D design & estimate

Let's talk about your outdoor project — no obligation, usually a response within 24 hours.

Get Your Free 3D Design & Quote

Tell us about your project and we’ll get back to you within 24 hours.

  • Licensed & Insured
  • 15+ Years
  • 500+ Projects
  • Google Reviews
  • Custom aluminum pergola & patio cover in South Florida
  • Custom aluminum pergola & patio cover in South Florida
  • Custom aluminum pergola & patio cover in South Florida
Get a Free Quote

No obligation · Free 3D design · Financing via Synchrony Bank

(786) 383-6066 EN · (786) 340-5157 ES