Aluminum Pergolas in Sunrise
Sunrise summers mean blazing inland heat and afternoon storms that roll in off the Everglades. Our custom aluminum pergolas turn an exposed patio into cool, usable shade — engineered, permitted, and installed by our own crew, with free 3D design before you commit.
- Licensed & Insured
- Financing Available
- 15+ Years
- Free 3D Design
- Miami-Dade HVHZ Approved
How much does an aluminum pergola cost in Sunrise, FL?
Most aluminum pergolas in Sunrise land around $8,700–$11,700 installed, roughly $30 per square foot. The final number depends on footprint, roof type — open-lattice, solid insulated, or motorized louvered — plus engineering and permit fees for Broward's hurricane zone. We give you a fixed, itemized quote with your free 3D design, and financing is available.
- from $30/sq ft installed
- 175 mph HVHZ wind-rated
- 2–4 wks typical build
- Free 3D design
Custom Aluminum Pergola Builders Serving Sunrise, FL
Neighborhoods we serve: Sawgrass · Welleby · Springtree · Sunrise Golf Village · Sunrise Lakes · Sunset Strip
Western Broward sun is punishing — Sunrise patios bake under near-constant UV, and cheap wood pergolas quickly gray, split, and invite rot in the humidity. We build with powder-coated, marine-grade aluminum that won't warp, rust, or fade, so the structure you install over your pool deck in Welleby or your screened lanai in Springtree still looks sharp a decade later. It's a one-time investment that shrugs off Florida heat instead of fighting it every season.
You choose how much sky you keep. An open-lattice roof filters harsh midday glare while letting breeze through, a solid insulated panel keeps a summer downpour off the grill, and a motorized louvered roof lets you open for stargazing over Sawgrass and close at the first drop of rain. Homeowners near Sunrise Golf Village and the Sawgrass Mills corridor use them to extend living space outdoors — for morning coffee, weekend cookouts, and shaded room for the kids.
Because Sunrise sits inside Broward's High-Velocity Hurricane Zone, a permanent pergola isn't a weekend project — it needs sealed engineering and approved products rated to 175 mph. We handle all of it: the City of Sunrise Building Division permit, the Florida Product Approval paperwork, and the HOA architectural-review submittal that communities like Sunrise Lakes and Welleby require. You get one accountable crew from the first 3D rendering to final inspection, with financing available so the project fits your budget.
Most Sunrise pergola projects run $8,700–$11,700 installed, or about $30 per square foot, depending on size, roof style, and whether you choose fixed panels or a motorized louvered roof. Your free 3D design comes with an itemized quote, and financing is available.
Permits & engineering
Sunrise falls within Broward County's High-Velocity Hurricane Zone, so a permanent aluminum pergola requires a permit, sealed engineering, and a Miami-Dade NOA or Florida Product Approval for every component, all designed to withstand 175 mph winds. Permitting runs through the City of Sunrise Building Division, and we pull and manage it for you.
We've been building custom aluminum structures across Broward for 15+ years and 500+ completed projects — from tight zero-lot-line patios in Welleby to wide pool decks off Nob Hill Road. Licensed, insured, and staffed by our own in-house crew, so there's no subcontractor guesswork and no surprises at inspection.



Pergola & Patio Cover Styles We Build
We design each structure to your home and how you want to use the space:
- Attached — anchored to the home and engineered to the wall structure; best for patios right off the back of the house
- Freestanding — stand-alone structures that anchor a pool deck, outdoor kitchen or seating area
- Louvered (motorized) — adjustable aluminum slats that open for sun and close for rain
- Bioclimatic / bladed — rotating louvers with smart controls and integrated drainage
Why Aluminum Beats Wood & Vinyl in South Florida
South Florida’s humidity, salt air and UV are hard on outdoor structures. Powder-coated aluminum holds up where other materials don’t:
- No rot or termites — unlike wood, aluminum won’t feed pests or break down in humidity
- No warping or fading — holds its shape and finish under Florida UV, where vinyl discolors
- No annual upkeep — no staining or sealing; just an occasional rinse
- Engineered strength — a structural backbone we can rate to local wind loads
Recent Projects from Miami-Dade, Broward & Palm Beach
Browse recent aluminum pergola installations from across Sunrise and western Broward — open-lattice roofs over pool decks, solid insulated covers shading outdoor kitchens, and sleek motorized louvered systems on modern patios. Each was custom-fabricated in powder-coated aluminum, engineered for 175 mph winds, and installed by our own crew. Picture the same clean lines on your patio, then book a free 3D design.
Why South Florida Homeowners Choose Us
One licensed local team handling design, permits and installation — built to last in the South Florida climate.
-
Licensed & Insured
A fully licensed, insured Florida contractor — your project and property are protected end to end.
-
Built to Miami-Dade HVHZ Code
Engineered and permitted for South Florida hurricane-force winds and the Florida Building Code.
-
In-House Crew
No subcontractors. The same team designs, engineers and installs every project.
-
Free 3D Design
See a realistic 3D rendering and a clear quote before anything is built — at no cost.
-
15+ Years of Experience
Hundreds of pergolas, enclosures and screen rooms installed across the tri-county area.
-
Financing Available
Build now and pay over time with flexible monthly plans through Synchrony Bank.
Our 3-Step Process: Consultation, 3D Design, Installation
- 01
Free Consultation
We visit your property, take measurements and learn how you want to use the space.
- 02
Custom 3D Design
You see a realistic 3D rendering and a clear quote before anything is built.
- 03
Permits & Installation
We pull the permits and our licensed crew installs to Florida Building Code.
Financing for your outdoor living project through Synchrony Bank
Build now and pay over time with flexible monthly payments and no upfront cost. Fast approval through our trusted partner, Synchrony Bank.
Learn about financingWhat our clients say about our work!
From the 3D design to the final install, the team was professional and on time. Our aluminum pergola completely transformed the backyard.
They handled the permits and HOA approval for us. The louvered roof is built like a tank and looks incredible.
Our pool screen enclosure is exactly what we wanted — no more bugs and easy to maintain. Highly recommend AB Aluminum.
Aluminum Pergolas in Nearby Areas
Other Services in Sunrise
Frequently Asked Questions
Do I need a permit for a pergola in Sunrise?
Yes. Any permanent aluminum pergola in Sunrise requires a building permit through the City of Sunrise Building Division. Because Broward is a High-Velocity Hurricane Zone, your plans need sealed engineering and product approvals rated to 175 mph. We prepare the drawings, pull the permit, and meet the inspector — you don't chase paperwork.
Will my Sunrise HOA approve an aluminum pergola?
Usually, yes — most Sunrise communities like Welleby, Springtree, and Sunrise Lakes allow pergolas but require architectural-review (ARB) approval first, covering color, placement, and setbacks. We provide the stamped drawings and product specs your board needs, and can match powder-coat colors to your home so the submittal goes through cleanly.
Is aluminum better than wood for Sunrise's climate?
For inland Broward heat, yes. Wood warps, splits, and rots under relentless UV and summer humidity, and it needs constant restaining. Powder-coated marine-grade aluminum won't rust, fade, or attract termites — it holds up to Sunrise sun and storms with essentially no maintenance beyond an occasional rinse. It's the practical long-term choice here.
How long does a pergola project take?
From signed design to final inspection, most Sunrise projects run about four to eight weeks. Custom fabrication and Broward's permit review drive the timeline more than installation itself, which is usually one to three days on site. We give you a realistic schedule up front and keep you posted at each milestone.
Get your free 3D design & estimate
Let's talk about your outdoor project — no obligation, usually a response within 24 hours.
Get Your Free 3D Design & Quote
Tell us about your project and we’ll get back to you within 24 hours.
- Licensed & Insured
- 15+ Years
- 500+ Projects
- Google Reviews
No obligation · Free 3D design · Financing via Synchrony Bank