Motorized Louvered Roof Systems in Miramar, FL
In Miramar's master-planned communities like Silver Lakes and Monarch Lakes, a motorized aluminum louvered roof turns your patio into a shaded, storm-ready room — open the blades for a breeze, close them watertight in seconds, all from a remote or app.
- Licensed & Insured
- Financing Available
- 15+ Years
- Free 3D Design
- Miami-Dade HVHZ Approved
Do I need HOA approval to add a louvered roof in Miramar?
In most Miramar communities, yes — Silver Lakes, Monarch Lakes, and similar HOAs require architectural review before the city issues a permit. We handle both: our free 3D design doubles as your ARC submittal package, and our in-house crew prepares the sealed engineering and Miami-Dade NOA paperwork the City of Miramar Building Division requires for a 175 mph-rated structure.
- from $85/sq ft installed
- 175 mph HVHZ wind-rated
- 2–4 wks typical build
- Free 3D design
Built for Miramar's HOA Communities and Broward's HVHZ Code
Neighborhoods we serve: Silver Lakes · Monarch Lakes · Riviera Isles · Vizcaya · Grand Palms · Sunset Lakes
Miramar sits within Broward County's High-Velocity Hurricane Zone, so every louvered roof we install is engineered to withstand 175 mph winds and carries a Miami-Dade NOA or Florida Product Approval before it goes up. Our in-house crew pulls the permit through the City of Miramar Building Division, submits sealed engineering, and inspects the finished structure — so homeowners in Vizcaya or Riviera Isles get a code-compliant, hurricane-rated roof without chasing paperwork themselves.
Miramar is inland, away from Broward's coastline, so the bigger design challenge is relentless sun and long, humid afternoons rather than salt air — our marine-grade powder-coated aluminum shrugs off both. Because most of Miramar's neighborhoods, from Silver Lakes to Monarch Lakes to Grand Palms, sit inside HOAs with strict architectural review boards, we build every louvered roof around your community's exterior-color and setback rules and provide the elevation drawings the ARC committee needs before you even apply for your city permit.
Once it's installed, the roof becomes the room you actually use — rotate the louvers open on a breezy evening in Sunset Lakes or Riviera Isles, then close them flat in seconds when a summer storm rolls in off the Everglades. Add integrated LED lighting for dinners after dark, motorized screens to keep mosquitoes out, and a rain sensor that closes the blades automatically if a downpour hits while you're at work — every option controlled from the same app or wall switch.
Most Miramar louvered roof projects fall within $14,500–$19,600, depending on size and motorization options; larger structures are typically quoted at $85/sq ft. Your free 3D design includes an exact, no-obligation estimate.
Permits & engineering
A louvered roof in Miramar requires a building permit through the City of Miramar Building Division: sealed engineering, a Miami-Dade NOA or Florida Product Approval rated to 175 mph, and — inside most Miramar HOAs — a separate architectural review approval before the city will issue the permit. We prepare and submit all of it.
Licensed and insured, AB Aluminum & Screens has completed 500+ aluminum installations across South Florida over 15+ years, with an in-house crew that works Miramar's HOA communities from Silver Lakes to Vizcaya regularly and knows each association's submittal process.



Smart Controls, Sensors & Add-Ons
Run your louvered roof from a wall switch, a handheld remote or your phone — and add the features that make the space usable day and night:
- Rain & wind sensors that close the slats automatically when the weather turns
- Integrated LED lighting built into the frame and slats
- Ceiling fans engineered into the structure
- Gas or electric heaters for the cooler months
- Drop-down power screens for privacy and bug control
Colors, Finishes & Materials
Every system is built from powder-coated aluminum chosen for South Florida’s sun, humidity and salt air — it won’t rust, rot or warp, and it never needs staining or sealing. Match it to your home with:
- Frame & slat finishes: white, bronze, black or custom color
- Powder-coated aluminum rated for salt air and UV exposure
- Engineered gauge, fasteners & anchoring to the Florida Building Code
- HVHZ wind-load compliance for Miami-Dade installations
Recent Projects from Miami-Dade, Broward & Palm Beach
Browse louvered roof installations across Miramar — from poolside retreats in Silver Lakes to covered lanais in Monarch Lakes and Riviera Isles. Each project shows the powder-coated aluminum finish, integrated lighting, and motorized screens available for your own patio, engineered to the same 175 mph HVHZ standard required throughout Broward County.
Why South Florida Homeowners Choose Us
One licensed local team handling design, permits and installation — built to last in the South Florida climate.
-
Licensed & Insured
A fully licensed, insured Florida contractor — your project and property are protected end to end.
-
Built to Miami-Dade HVHZ Code
Engineered and permitted for South Florida hurricane-force winds and the Florida Building Code.
-
In-House Crew
No subcontractors. The same team designs, engineers and installs every project.
-
Free 3D Design
See a realistic 3D rendering and a clear quote before anything is built — at no cost.
-
15+ Years of Experience
Hundreds of pergolas, enclosures and screen rooms installed across the tri-county area.
-
Financing Available
Build now and pay over time with flexible monthly plans through Synchrony Bank.
Our 3-Step Process: Consultation, 3D Design, Installation
- 01
Free Consultation
We visit your property, take measurements and learn how you want to use the space.
- 02
Custom 3D Design
You see a realistic 3D rendering and a clear quote before anything is built.
- 03
Permits & Installation
We pull the permits and our licensed crew installs to Florida Building Code.
Financing for your outdoor living project through Synchrony Bank
Build now and pay over time with flexible monthly payments and no upfront cost. Fast approval through our trusted partner, Synchrony Bank.
Learn about financingWhat our clients say about our work!
From the 3D design to the final install, the team was professional and on time. Our aluminum pergola completely transformed the backyard.
They handled the permits and HOA approval for us. The louvered roof is built like a tank and looks incredible.
Our pool screen enclosure is exactly what we wanted — no more bugs and easy to maintain. Highly recommend AB Aluminum.
Louvered Roof Systems in Nearby Areas
Other Services in Miramar
Frequently Asked Questions
What permits and engineering does a louvered roof need in Miramar?
Because Miramar is in Broward County's High-Velocity Hurricane Zone, a permanent louvered roof needs a City of Miramar building permit, sealed structural engineering, and a Miami-Dade NOA or Florida Product Approval certifying it to 175 mph winds. We handle every submittal, including HOA architectural review where required, so you never deal with the building department directly.
How do the motorized louvers and rain sensor work?
Aluminum blades rotate on a single motor, controlled by app, wall switch, or remote, to any angle between fully open and watertight-closed. An optional sensor detects the first drops of rain or a wind gust and closes the louvers automatically, even if you're not home — useful during Miramar's fast-moving summer storms.
Is the roof actually waterproof when closed?
Yes. When the louvers rotate flat, they interlock and channel rain into an integrated gutter system built into the frame, so water drains away from the structure instead of pooling or dripping through — the same roof that shades you on a sunny afternoon keeps you fully dry during a downpour.
Can the louvered roof attach to my house, or does it need to stand alone?
Both options work. An attached louvered roof ties into your home's structure for a seamless extension of your living space, while a freestanding version works over a pool or open patio away from the house — common in Miramar's larger backyards in communities like Grand Palms and Riviera Isles. Either way it's engineered and permitted the same.
Get your free 3D design & estimate
Let's talk about your outdoor project — no obligation, usually a response within 24 hours.
Get Your Free 3D Design & Quote
Tell us about your project and we’ll get back to you within 24 hours.
- Licensed & Insured
- 15+ Years
- 500+ Projects
- Google Reviews
No obligation · Free 3D design · Financing via Synchrony Bank