Motorized aluminum louvered roof over a Wellington, FL patio with the louvers open
Serving Wellington, FL

Louvered Roof Systems in Wellington, FL

Wellington's afternoon sun and Palm Beach County's summer storms test any patio cover. Our motorized aluminum louvered roofs rotate open for shade and breeze, then seal watertight before the next downpour — engineered to Miami-Dade HVHZ standards, no matter what code requires locally.

  • Licensed & Insured
  • Financing Available
  • 15+ Years
  • Free 3D Design
  • Miami-Dade HVHZ Approved
Louvered Roof Systems in Wellington, Palm Beach — AB Aluminum & Screens

How much does a motorized louvered roof cost in Wellington, FL?

Most Wellington louvered roof systems fall within $14,500–$19,600, priced at roughly $85/sq ft, depending on size, motorization, and options like LED lighting or motorized screens. Because Palm Beach County requires sealed engineering and a permit for any permanent structure, your final number also reflects site conditions — we confirm exact pricing during your free 3D design consultation.

  • from $85/sq ft installed
  • 140–170 mph wind-borne debris
  • 2–4 wks typical build
  • Free 3D design

Motorized Louvered Roofs Built for Wellington's Equestrian Country Club Living

Neighborhoods we serve: Palm Beach Polo & Country Club · Wycliffe · Grand Prix Village · Wellington Aero Club · Binks Forest · South Shore

Wellington sits well inland, so the real challenge on your patio is intense, direct UV and the daily summer thunderstorms that roll through communities like Palm Beach Polo & Country Club and Grand Prix Village, not salt air. Our motorized aluminum louvers rotate to filter or block that overhead sun, then close flat and watertight in seconds when a storm builds, draining rain through integrated gutters — so afternoons by the pool or after a ride from the barn stay covered.

A permanent aluminum roof structure in Wellington requires a permit and sealed engineering, whether it's submitted through Palm Beach County PZB or the Village directly, plus Florida Product Approval for the system itself. Palm Beach County sits in the Wind-Borne Debris Region, with design winds running roughly 165 to 175 mph near the coast — but we build every louvered roof to Miami-Dade HVHZ product standards, the strictest wind rating in the state, so your structure clears review with margin to spare and holds up over Wellington's open, wind-exposed acreage.

Beyond weather, a louvered roof turns a Wellington lanai into a true outdoor room — integrated LED lighting for evening gatherings, motorized screens to keep bugs out during barn season, and app or remote control so you can adjust the blades from the saddle or the sofa. Many Wellington communities, from Wycliffe to the country club neighborhoods off South Shore Boulevard, run their own architectural review boards, and our team handles that submission alongside the county permit so your project moves forward without delay.

Wellington louvered roof systems typically run $14,500–$19,600, or $85/sq ft, depending on size, motorization, and add-ons like screens or LED lighting; your free 3D design includes an exact quote.

Permits & engineering

A louvered roof is a permanent structure, so it requires a building permit with sealed engineering and Florida Product Approval, submitted through Palm Beach County PZB or the Village of Wellington. AB Aluminum handles the full permit package and engineering on your behalf, building to Miami-Dade HVHZ standards even though Wellington sits in the Wind-Borne Debris Region rather than the county's HVHZ zone.

Licensed and insured with 15+ years and 500+ louvered roof and screen installations across Palm Beach County, including projects throughout Wellington's equestrian and country club communities — free 3D design, in-house crews, and financing available.

15+
Years of Experience
500+
Projects Completed
3
Counties Served
100%
Licensed & Insured
Louvered Roofs project — AB Aluminum & ScreensLouvered Roofs project — AB Aluminum & ScreensLouvered Roofs project — AB Aluminum & ScreensLouvered Roofs project — AB Aluminum & Screens

Smart Controls, Sensors & Add-Ons

Run your louvered roof from a wall switch, a handheld remote or your phone — and add the features that make the space usable day and night:

  • Rain & wind sensors that close the slats automatically when the weather turns
  • Integrated LED lighting built into the frame and slats
  • Ceiling fans engineered into the structure
  • Gas or electric heaters for the cooler months
  • Drop-down power screens for privacy and bug control
aluminum louvered pergola miami, aluminum pergola contractor miami, louvered aluminum roof system south florida

Colors, Finishes & Materials

Every system is built from powder-coated aluminum chosen for South Florida’s sun, humidity and salt air — it won’t rust, rot or warp, and it never needs staining or sealing. Match it to your home with:

  • Frame & slat finishes: white, bronze, black or custom color
  • Powder-coated aluminum rated for salt air and UV exposure
  • Engineered gauge, fasteners & anchoring to the Florida Building Code
  • HVHZ wind-load compliance for Miami-Dade installations
Louvered Roofs project — AB Aluminum & Screens
Aluminum louvered pergola beside a pool in South Florida
Gallery

Recent Projects from Miami-Dade, Broward & Palm Beach

Browse louvered roof installations across Wellington — from covered lanais overlooking equestrian estates near Palm Beach Polo & Country Club to entertaining spaces in Wycliffe and Grand Prix Village. Each gallery photo reflects real motorized aluminum systems built and permitted for South Florida's wind and rain, not stock renderings.

Why AB Aluminum & Screens

Why South Florida Homeowners Choose Us

One licensed local team handling design, permits and installation — built to last in the South Florida climate.

  • Licensed & Insured

    A fully licensed, insured Florida contractor — your project and property are protected end to end.

  • Built to Miami-Dade HVHZ Code

    Engineered and permitted for South Florida hurricane-force winds and the Florida Building Code.

  • In-House Crew

    No subcontractors. The same team designs, engineers and installs every project.

  • Free 3D Design

    See a realistic 3D rendering and a clear quote before anything is built — at no cost.

  • 15+ Years of Experience

    Hundreds of pergolas, enclosures and screen rooms installed across the tri-county area.

  • Financing Available

    Build now and pay over time with flexible monthly plans through Synchrony Bank.

Our Process

Our 3-Step Process: Consultation, 3D Design, Installation

  1. 01

    Free Consultation

    We visit your property, take measurements and learn how you want to use the space.

  2. 02

    Custom 3D Design

    You see a realistic 3D rendering and a clear quote before anything is built.

  3. 03

    Permits & Installation

    We pull the permits and our licensed crew installs to Florida Building Code.

Aluminum patio cover beside a pool with palm trees in South Florida
Financing

Financing for your outdoor living project through Synchrony Bank

Build now and pay over time with flexible monthly payments and no upfront cost. Fast approval through our trusted partner, Synchrony Bank.

Learn about financing
Reviews & Testimonials

What our clients say about our work!

4.9 Based on Google reviews
From the 3D design to the final install, the team was professional and on time. Our aluminum pergola completely transformed the backyard.
Maria G. Pinecrest, FL
They handled the permits and HOA approval for us. The louvered roof is built like a tank and looks incredible.
David R. Weston, FL
Our pool screen enclosure is exactly what we wanted — no more bugs and easy to maintain. Highly recommend AB Aluminum.
Jennifer M. Coral Gables, FL

Frequently Asked Questions

Do I need a permit for a louvered roof in Wellington?

Yes. A motorized louvered roof is a permanent aluminum structure, so it requires a building permit with sealed engineering and Florida Product Approval, submitted through Palm Beach County PZB or directly with the Village of Wellington depending on your address. AB Aluminum prepares and submits the full engineering package for you.

Will my HOA or country club architectural review board approve a louvered roof?

Most Wellington communities, including gated equestrian and country club neighborhoods, require architectural review board approval before construction. We provide the renderings, material specs, and engineering documents your HOA typically asks for, and we've guided homeowners through this process throughout Palm Beach County.

How do the motorized louvers and rain sensor work?

A wall switch, remote, or smartphone app rotates the aluminum blades from fully open to fully closed in seconds. An optional rain and wind sensor detects changing weather and automatically closes the roof for you, even when nobody's home, so furniture and flooring stay protected.

How strong is the roof in a storm, and what's covered under warranty?

Every system is engineered and permitted to Miami-Dade HVHZ product standards — the strictest wind-load requirement in Florida — even though Wellington falls in Palm Beach County's Wind-Borne Debris Region rather than the county's HVHZ zone. Powder-coated marine-grade aluminum construction is backed by manufacturer and workmanship warranties we'll detail in your quote.

Get your free 3D design & estimate

Let's talk about your outdoor project — no obligation, usually a response within 24 hours.

Get Your Free 3D Design & Quote

Tell us about your project and we’ll get back to you within 24 hours.

  • Licensed & Insured
  • 15+ Years
  • 500+ Projects
  • Google Reviews
  • Motorized louvered roof system in South Florida
  • Motorized louvered roof system in South Florida
  • Motorized louvered roof system in South Florida
Get a Free Quote

No obligation · Free 3D design · Financing via Synchrony Bank

(786) 383-6066 EN · (786) 340-5157 ES