Patio Screen Enclosures in Coconut Grove, FL
Enclose your Coconut Grove lanai or patio in bug-free comfort. Custom aluminum screen enclosures block mosquitoes and no-see-ums from Biscayne Bay while adding shaded living space, built to 175 mph HVHZ standards with a free 3D design.
- Licensed & Insured
- Financing Available
- 15+ Years
- Free 3D Design
- Miami-Dade HVHZ Approved
Can I enclose my existing covered patio or lanai in Coconut Grove with a screen system?
Yes. Most Coconut Grove screen enclosures build off an existing covered patio, lanai or under-truss slab — we frame it in marine-grade aluminum and screen, engineered to 175 mph HVHZ standards with Miami-Dade NOA approval. The City of Miami permit and sealed engineering are handled for you, start to finish, backed by our free 3D design.
- from $22/sq ft installed
- 175 mph HVHZ wind-rated
- 2–4 wks typical build
- Free 3D design
Screen Enclosures Designed for Coconut Grove's Waterfront Canopy
Neighborhoods we serve: Center Grove · South Grove · Bayshore Drive · The Village of Coconut Grove
From the historic bungalows of South Grove to the bayfront estates along Bayshore Drive, homeowners are enclosing existing patios, lanais and under-truss porches with custom aluminum screens. A screened enclosure turns that shaded slab into usable living space you can actually sit in year-round — no mosquitoes, no no-see-ums, no leaf litter drifting down from the Grove's banyan canopy. Add a screen door, wire in a ceiling fan, and the space works for morning coffee, dinner parties or a quiet reading nook.
Coconut Grove sits directly on Biscayne Bay, so salt air is a real factor for any structure near the water — we use marine-grade, powder-coated aluminum framing that resists corrosion far longer than off-the-shelf screen kits. Every enclosure is engineered to Florida's High-Velocity Hurricane Zone standard, rated to 175 mph winds with Miami-Dade NOA-approved components. Because Coconut Grove falls under the City of Miami's building department, we pull the required permit and sealed engineering for you, including extra care on homes inside the Charles Avenue historic district.
Choose from standard fiberglass screen for everyday airflow, no-see-um mesh for the tightest bug barrier, solar screen to cut Grove afternoon glare, or clear vinyl panels for a semi-enclosed look in cooler months. Add privacy screening along a shared property line or a pet-safe barrier for dogs who'd rather nap on the lanai than the lawn. Many Grove homeowners start with a screen room and later upgrade it to a fully insulated Florida room. Our in-house crew builds from a free 3D design, and financing is available.
Most Coconut Grove patio screen enclosures fall within $3,700–$5,100, with framing and mesh typically priced at $22/sq ft; your free 3D design includes an exact quote for your space.
Permits & engineering
Coconut Grove falls under the City of Miami's building department. Permanent screen enclosures require a building permit, sealed engineering, and Miami-Dade NOA product approval, engineered to withstand 175 mph HVHZ winds — we handle the full permit process for you.
Licensed and insured with 15+ years and 500+ screen and aluminum projects completed across Miami-Dade, including homes throughout Coconut Grove's bayfront and historic pockets.
Screen Room Styles We Build
We design each screen room to your home and how you want to use the space:
- Lanai — roofed, partially enclosed outdoor room; the most common South Florida configuration.
- Wrap-around — runs along multiple sides of the home for larger covered footprints.
- Attached porch enclosure — encloses an existing porch with screen panels and a structural aluminum frame.
- Pool-side screen room — connects your living space to the pool deck while keeping insects out.
Screen Mesh Options
The right mesh depends on where you live and how you use the space:
- Standard 18×14 fiberglass — the all-purpose choice for most South Florida patios.
- No-see-um mesh — tighter weave for canal-front and coastal areas with sandflies.
- Pet-resistant mesh — stands up to claws and lean-against pressure.
- Privacy / solar mesh — reduces visibility and heat on exposed patios.
Why South Florida Homeowners Choose Us
One licensed local team handling design, permits and installation — built to last in the South Florida climate.
-
Licensed & Insured
A fully licensed, insured Florida contractor — your project and property are protected end to end.
-
Built to Miami-Dade HVHZ Code
Engineered and permitted for South Florida hurricane-force winds and the Florida Building Code.
-
In-House Crew
No subcontractors. The same team designs, engineers and installs every project.
-
Free 3D Design
See a realistic 3D rendering and a clear quote before anything is built — at no cost.
-
15+ Years of Experience
Hundreds of pergolas, enclosures and screen rooms installed across the tri-county area.
-
Financing Available
Build now and pay over time with flexible monthly plans through Synchrony Bank.
Our 3-Step Process: Consultation, 3D Design, Installation
- 01
Free Consultation
We visit your property, take measurements and learn how you want to use the space.
- 02
Custom 3D Design
You see a realistic 3D rendering and a clear quote before anything is built.
- 03
Permits & Installation
We pull the permits and our licensed crew installs to Florida Building Code.
Financing for your outdoor living project through Synchrony Bank
Build now and pay over time with flexible monthly payments and no upfront cost. Fast approval through our trusted partner, Synchrony Bank.
Learn about financingWhat our clients say about our work!
From the 3D design to the final install, the team was professional and on time. Our aluminum pergola completely transformed the backyard.
They handled the permits and HOA approval for us. The louvered roof is built like a tank and looks incredible.
Our pool screen enclosure is exactly what we wanted — no more bugs and easy to maintain. Highly recommend AB Aluminum.
Patio Screens in Nearby Areas
Other Services in Coconut Grove
Frequently Asked Questions
Do I need a permit for a patio screen enclosure in Coconut Grove?
Yes. Because Coconut Grove is part of the City of Miami, any permanent aluminum screen enclosure needs a building permit, sealed engineer drawings, and Miami-Dade NOA product approval rated for 175 mph HVHZ winds. We handle the entire permitting process, including any additional review for homes in a historic district.
Will the screened enclosure hold up to storms this close to Biscayne Bay?
It's built to. Every frame uses marine-grade, powder-coated aluminum engineered to Florida's High-Velocity Hurricane Zone code and rated to 175 mph winds, which matters most for Grove properties exposed to salt air and open water off Bayshore Drive and the bay.
What screen mesh options do you offer?
We install standard fiberglass mesh, fine no-see-um mesh, solar screen for glare and heat control, and clear vinyl panels for cooler-weather use. We'll help you pick the right combination based on sun exposure, privacy needs and how you plan to use the space.
Can a screen enclosure be converted into a Florida room later?
Yes. Many clients start with a screen enclosure and later upgrade the same aluminum frame into an insulated, glass-enclosed Florida room. Because we design and permit the structure upfront, that future conversion is far simpler than starting from scratch.
Get your free 3D design & estimate
Let's talk about your outdoor project — no obligation, usually a response within 24 hours.
Get Your Free 3D Design & Quote
Tell us about your project and we’ll get back to you within 24 hours.
- Licensed & Insured
- 15+ Years
- 500+ Projects
- Google Reviews
No obligation · Free 3D design · Financing via Synchrony Bank