Patio Screen Enclosures in Jupiter, FL
Turn your Jupiter lanai, porch or paver patio into bug-free living space you'll actually use. Our screen enclosures block mosquitoes, no-see-ums and UV while framed in marine-grade aluminum engineered for Jupiter Island's salt air and inland Abacoa's summer heat alike.
- Licensed & Insured
- Financing Available
- 15+ Years
- Free 3D Design
- Miami-Dade HVHZ Approved
Do I need a permit for a patio screen enclosure in Jupiter, FL?
Yes. Palm Beach County is a Wind-Borne Debris Region, so any permanent aluminum screen enclosure needs sealed engineering, Florida Product Approval and a building permit through Palm Beach County PZB or the Town of Jupiter. AB Aluminum prepares and files the full permit package, building every frame to Miami-Dade HVHZ standards, which exceed local requirements.
- from $22/sq ft installed
- 140–170 mph wind-borne debris
- 2–4 wks typical build
- Free 3D design
Custom Screen Enclosures Built for Jupiter Living
Neighborhoods we serve: Jupiter Island · Admirals Cove · Abacoa · Jonathan's Landing
Waterfront patios along Jupiter Island and the docks of Admirals Cove take a beating from salt spray off the Atlantic and the Loxahatchee River, which corrodes cheap screen frames within a few seasons. We enclose your existing lanai or covered patio in powder-coated marine-grade aluminum built for that exposure, so you get a shaded, bug-free space to eat, entertain or watch the water without no-see-ums, pollen or storm debris crossing the threshold.
Inland in Abacoa and around Jonathan's Landing, the challenge is different: long, unshaded afternoons that bake a paver patio, plus an HOA architectural review before any structure goes up. We design your enclosure to your community's guidelines, screening in an existing covered lanai or building a new flat, gable or hip screen roof, and turn wasted patio square footage into shaded living space with a screen door for pets and kids to come and go.
Palm Beach County sits in the Wind-Borne Debris Region, with design winds running roughly 165 to 175 mph near the coast, so a permanent screen enclosure here needs sealed engineering, Florida Product Approval and a permit through Palm Beach County PZB or the Town of Jupiter. We build every frame to Miami-Dade HVHZ product standards — the strictest in Florida — handle the permit package ourselves, and can design the structure to convert into a fully glassed Florida room later.
Most Jupiter patio screen enclosures run $3,700–$5,100, depending on size, roof style and mesh type, or $22/sq ft for larger screen rooms.
Permits & engineering
Permanent patio screen enclosures in Jupiter require sealed engineering, Florida Product Approval and a building permit — processed through Palm Beach County PZB for unincorporated areas or the Town of Jupiter for in-town addresses. AB Aluminum prepares and files the full permit package for you.
Licensed and insured with 500+ aluminum enclosures completed across South Florida, including screened lanais and patios from Jupiter Island to Abacoa.
Screen Room Styles We Build
We design each screen room to your home and how you want to use the space:
- Lanai — roofed, partially enclosed outdoor room; the most common South Florida configuration.
- Wrap-around — runs along multiple sides of the home for larger covered footprints.
- Attached porch enclosure — encloses an existing porch with screen panels and a structural aluminum frame.
- Pool-side screen room — connects your living space to the pool deck while keeping insects out.
Screen Mesh Options
The right mesh depends on where you live and how you use the space:
- Standard 18×14 fiberglass — the all-purpose choice for most South Florida patios.
- No-see-um mesh — tighter weave for canal-front and coastal areas with sandflies.
- Pet-resistant mesh — stands up to claws and lean-against pressure.
- Privacy / solar mesh — reduces visibility and heat on exposed patios.
Recent Projects from Miami-Dade, Broward & Palm Beach
Browse recent screen enclosures we've built across Jupiter, from salt-air lanais on Jupiter Island and Admirals Cove to shaded family patios in Abacoa and Jonathan's Landing, every frame powder-coated marine-grade aluminum and engineered to Miami-Dade HVHZ standards.
Why South Florida Homeowners Choose Us
One licensed local team handling design, permits and installation — built to last in the South Florida climate.
-
Licensed & Insured
A fully licensed, insured Florida contractor — your project and property are protected end to end.
-
Built to Miami-Dade HVHZ Code
Engineered and permitted for South Florida hurricane-force winds and the Florida Building Code.
-
In-House Crew
No subcontractors. The same team designs, engineers and installs every project.
-
Free 3D Design
See a realistic 3D rendering and a clear quote before anything is built — at no cost.
-
15+ Years of Experience
Hundreds of pergolas, enclosures and screen rooms installed across the tri-county area.
-
Financing Available
Build now and pay over time with flexible monthly plans through Synchrony Bank.
Our 3-Step Process: Consultation, 3D Design, Installation
- 01
Free Consultation
We visit your property, take measurements and learn how you want to use the space.
- 02
Custom 3D Design
You see a realistic 3D rendering and a clear quote before anything is built.
- 03
Permits & Installation
We pull the permits and our licensed crew installs to Florida Building Code.
Financing for your outdoor living project through Synchrony Bank
Build now and pay over time with flexible monthly payments and no upfront cost. Fast approval through our trusted partner, Synchrony Bank.
Learn about financingWhat our clients say about our work!
From the 3D design to the final install, the team was professional and on time. Our aluminum pergola completely transformed the backyard.
They handled the permits and HOA approval for us. The louvered roof is built like a tank and looks incredible.
Our pool screen enclosure is exactly what we wanted — no more bugs and easy to maintain. Highly recommend AB Aluminum.
Patio Screens in Nearby Areas
Other Services in Jupiter
Frequently Asked Questions
Do I need a permit for a patio screen enclosure in Jupiter, FL?
Yes — Palm Beach County sits in the Wind-Borne Debris Region, with design winds of roughly 165–175 mph near the coast. Any permanent aluminum screen enclosure needs sealed engineering, Florida Product Approval and a permit through Palm Beach County PZB or the Town of Jupiter. We handle the entire permit process for you.
Are your screen enclosures rated for Jupiter's hurricane-force winds?
Yes. Even though Palm Beach County isn't blanket-HVHZ, we engineer every frame to Miami-Dade HVHZ product standards — the toughest wind-load requirements in Florida. That gives waterfront homes on Jupiter Island and Admirals Cove a structure built beyond what local code requires, in marine-grade powder-coated aluminum that resists salt-air corrosion.
Can you screen in my existing covered patio or lanai instead of building a new roof?
In most cases, yes. If your Jupiter home already has a covered patio, lanai or space under the roof truss, we can frame and screen it in directly, which is faster and less costly than adding a new roof structure. If the area is open, we'll design a matching screen roof — flat, gable or hip — engineered to the same wind standard.
Can a screened patio in Jupiter later become a Florida room?
Yes. We can build your aluminum frame to accept impact-rated glass or vinyl panels down the road, so a screen room installed today can convert into a fully enclosed, air-conditioned Florida room later — a common upgrade path for homeowners in Abacoa and Jonathan's Landing who want more living space over time.
Get your free 3D design & estimate
Let's talk about your outdoor project — no obligation, usually a response within 24 hours.
Get Your Free 3D Design & Quote
Tell us about your project and we’ll get back to you within 24 hours.
- Licensed & Insured
- 15+ Years
- 500+ Projects
- Google Reviews
No obligation · Free 3D design · Financing via Synchrony Bank