Aluminum Pool Screen Enclosures in Palmetto Bay, FL
A custom aluminum pool enclosure keeps Palmetto Bay's mosquitoes, leaves, and afternoon downpour debris out of your pool while cutting glare and UV. Engineered to 175 mph HVHZ standards, every cage starts with a free 3D design of your Old Cutler Road backyard.
- Licensed & Insured
- Financing Available
- 15+ Years
- Free 3D Design
- Miami-Dade HVHZ Approved
What does a pool screen enclosure cost in Palmetto Bay?
In Palmetto Bay, aluminum pool enclosure costs typically fall in the $9,200–$12,400 range, with pricing scaled by square footage at roughly $24/sq ft. Final pricing depends on cage height, screen roof style (mansard, dome, gable, or flat), and screen mesh — standard, no-see-um, or super-screen. We provide a free 3D design and itemized quote before any commitment.
- from $24/sq ft installed
- 175 mph HVHZ wind-rated
- 2–4 wks typical build
- Free 3D design
Pool Screen Enclosures Built for Palmetto Bay Backyards
Neighborhoods we serve: Old Cutler Bay · Saga Bay · Franjo Triangle · Coral Reef · Palmetto Bay Village Center
Palmetto Bay's tree canopy along Old Cutler Road and Coral Reef Drive is beautiful, but it also drops leaves, seed pods, and no-see-ums straight into your pool. A screened aluminum enclosure seals that out while letting the breeze through, so you're not skimming the surface or running the pump extra hours every time a storm rolls off Biscayne Bay. It also keeps frogs, lizards, and mosquitoes from turning your evening swim into a bug hunt.
Homes along Old Cutler Bay and the finger canals near Biscayne Bay sit close enough to the water that salt air eats through standard hardware fast — we build every frame from powder-coated marine-grade aluminum so it won't pit or corrode. Farther inland in Saga Bay and Franjo Triangle, the bigger issue is sun: unshaded decks bake by early afternoon. A screen roof cuts direct UV while keeping the space open, and our design team works within your HOA's architectural guidelines from the start.
Every enclosure we install in Palmetto Bay is engineered to Miami-Dade's 175 mph HVHZ wind standard, using aluminum components with current Miami-Dade NOA approval. We pull the permit through the Village of Palmetto Bay building department and handle the sealed engineering, so you don't have to chase paperwork. Beyond storm performance, the cage adds a real barrier around the pool for kids and pets, and with less debris landing in the water, you'll spend less on chlorine and filter cleanings.
Most Palmetto Bay pool enclosures run $9,200–$12,400, depending on cage size, roof style, and screen type; ask about our $24/sq ft estimate and financing options.
Permits & engineering
Pool enclosures in Palmetto Bay require a building permit with sealed engineering and Miami-Dade NOA product approval, since the village falls under Miami-Dade's High-Velocity Hurricane Zone code. We pull permits through the Village of Palmetto Bay building department and manage the process end to end.
Licensed and insured, with 15+ years and 500+ pool enclosures built across South Florida — including projects up and down Old Cutler Road — using our own in-house install crews, not subcontractors.
Pool Enclosure Styles We Build
We engineer every cage to your pool, deck and home — in the profile that fits your space:
- Mansard — the flat-top profile most common in South Florida; clean lines and generous headroom
- Hip — sloped sides that meet at a peak; structurally efficient and low-profile
- Gable — pitched roof for taller pool areas or two-story homes that need clearance
- Dome — specialty profile for larger pools and feature areas
Screen Mesh Options
The right mesh depends on where you live and how you use the space:
- Standard 18×14 fiberglass — the all-purpose choice for most South Florida homes
- No-see-um mesh — tighter weave for canal-front and coastal areas with sandflies
- Pet-resistant mesh — stands up to claws and lean-against pressure
- Hurricane-rated specialty fabrics — added protection for storm-exposed coastlines
Recent Projects from Miami-Dade, Broward & Palm Beach
Browse aluminum pool enclosures we've built across Palmetto Bay, from screened cages framing views of mature oak canopy near Old Cutler Road to clean flat-roof designs on modern Saga Bay patios — each one engineered, permitted, and installed by our in-house crew.
Why South Florida Homeowners Choose Us
One licensed local team handling design, permits and installation — built to last in the South Florida climate.
-
Licensed & Insured
A fully licensed, insured Florida contractor — your project and property are protected end to end.
-
Built to Miami-Dade HVHZ Code
Engineered and permitted for South Florida hurricane-force winds and the Florida Building Code.
-
In-House Crew
No subcontractors. The same team designs, engineers and installs every project.
-
Free 3D Design
See a realistic 3D rendering and a clear quote before anything is built — at no cost.
-
15+ Years of Experience
Hundreds of pergolas, enclosures and screen rooms installed across the tri-county area.
-
Financing Available
Build now and pay over time with flexible monthly plans through Synchrony Bank.
Our 3-Step Process: Consultation, 3D Design, Installation
- 01
Free Consultation
We visit your property, take measurements and learn how you want to use the space.
- 02
Custom 3D Design
You see a realistic 3D rendering and a clear quote before anything is built.
- 03
Permits & Installation
We pull the permits and our licensed crew installs to Florida Building Code.
Financing for your outdoor living project through Synchrony Bank
Build now and pay over time with flexible monthly payments and no upfront cost. Fast approval through our trusted partner, Synchrony Bank.
Learn about financingWhat our clients say about our work!
From the 3D design to the final install, the team was professional and on time. Our aluminum pergola completely transformed the backyard.
They handled the permits and HOA approval for us. The louvered roof is built like a tank and looks incredible.
Our pool screen enclosure is exactly what we wanted — no more bugs and easy to maintain. Highly recommend AB Aluminum.
Pool Enclosures in Nearby Areas
Other Services in Palmetto Bay
Frequently Asked Questions
Do I need a permit for a pool enclosure in Palmetto Bay?
Yes. Any permanent aluminum pool enclosure in Miami-Dade County — including Palmetto Bay — needs a building permit, sealed structural engineering, and Miami-Dade NOA product approval, since the area falls under the High-Velocity Hurricane Zone code rated to 175 mph winds. We handle the permit through the Village of Palmetto Bay building department and manage engineering and inspections.
What screen mesh options are available?
We install standard 18x14 charcoal screen for everyday bug and debris control, no-see-um mesh for finer insects common near canals and green space, and pet- or super-screen for extra durability against claws and stronger winds. Each option balances airflow, visibility, and UV block, and we'll recommend the right mesh during your free design consultation.
Can you rescreen my existing pool cage, or do I need a new one?
If your Palmetto Bay pool cage's aluminum frame is structurally sound, we can often rescreen it with fresh mesh and new spline for a fraction of the cost of a full rebuild. If the frame shows corrosion, storm damage, or no longer meets current HVHZ wind code, a new engineered enclosure is the safer long-term investment — we'll assess it on site, free.
Will the enclosure hold up near Biscayne Bay's salt air?
Yes. Every frame is powder-coated marine-grade aluminum, which resists the corrosion that plain aluminum or steel develops near Old Cutler Bay and other waterfront pockets of Palmetto Bay. Combined with 175 mph HVHZ engineering and Miami-Dade NOA-approved components, the structure is built for both salt exposure and hurricane-force wind.
Get your free 3D design & estimate
Let's talk about your outdoor project — no obligation, usually a response within 24 hours.
Get Your Free 3D Design & Quote
Tell us about your project and we’ll get back to you within 24 hours.
- Licensed & Insured
- 15+ Years
- 500+ Projects
- Google Reviews
No obligation · Free 3D design · Financing via Synchrony Bank