Aluminum pool screen enclosure over a backyard pool in Sunny Isles Beach, FL
Serving Sunny Isles Beach, FL

Aluminum Pool Enclosures in Sunny Isles Beach, FL

Sunny Isles Beach sits on a barrier island between the Atlantic and the Intracoastal, which means every outdoor structure fights salt air from two directions. Our marine-grade aluminum pool enclosures keep your pool shaded, bug-free, and protected — without corroding.

  • Licensed & Insured
  • Financing Available
  • 15+ Years
  • Free 3D Design
  • Miami-Dade HVHZ Approved
Pool Enclosures in Sunny Isles Beach, Miami-Dade — AB Aluminum & Screens

How much does a pool cage cost in Sunny Isles Beach?

Most Sunny Isles Beach pool enclosures fall around $9,200–$12,400, priced near $24/sq ft of screened area, depending on cage size, roof style (flat, gable, dome, or mansard), and mesh upgrade. Because the city is HVHZ, sealed engineering and Miami-Dade NOA-rated aluminum are built into every quote — request a free 3D design for an exact number.

  • from $24/sq ft installed
  • 175 mph HVHZ wind-rated
  • 2–4 wks typical build
  • Free 3D design

Pool Enclosures Engineered for Sunny Isles Beach's Salt Air

Neighborhoods we serve: Golden Shores · Maule Lake · Sunny Isles Beach Boulevard corridor · Collins Avenue

Homes in Golden Shores and along the canals off Maule Lake sit within a few hundred yards of open water on both sides — the Atlantic to the east, the Intracoastal to the west. That double dose of salt air corrodes standard aluminum and steel fast. We build every pool cage from powder-coated marine-grade aluminum, engineered to Miami-Dade's 175 mph HVHZ wind standard and approved under Miami-Dade NOA, so the frame holds up to salt spray and storm season alike.

A screened enclosure turns a Sunny Isles Beach pool deck into usable living space again — no mosquitoes drifting in from the mangrove-lined canals around Maule Lake, no palm debris or no-see-ums fouling the water, and noticeably less time spent skimming and balancing chemicals. Standard 18x14 mesh handles typical flying insects; step up to super-screen or pet-resistant mesh where no-see-ums or a dog are a factor. The enclosure also functions as a recognized barrier layer that supports Florida's pool child-safety code.

Because Sunny Isles Beach is its own incorporated city, your permit runs through the Sunny Isles Beach Building Department rather than unincorporated Miami-Dade RER — we handle that submittal, the sealed engineering, and the Miami-Dade NOA paperwork so you're not chasing forms. Our in-house crew installs on tight lots common in Golden Shores and along the Intracoastal, with mansard, dome, gable, or flat screen-roof styles to match the home. Every project starts with a free 3D design, and financing is available.

Pricing for a Sunny Isles Beach pool enclosure depends on the pool and deck footprint, roof style, and screen type; most projects fall in the $9,200–$12,400 range, figured at roughly $24/sq ft of screened area.

Permits & engineering

Sunny Isles Beach is a fully incorporated city, so pool enclosure permits are filed with the Sunny Isles Beach Building Department, not Miami-Dade RER directly. Because the city sits in the HVHZ, every enclosure still requires sealed structural engineering and a product approved under Miami-Dade NOA, rated to 175 mph winds — we prepare and submit that full package for you.

Licensed and insured with 15+ years building HVHZ-rated aluminum structures and 500+ completed projects across South Florida, including barrier-island homes in Sunny Isles Beach where salt exposure is constant on both the ocean and Intracoastal sides.

15+
Years of Experience
500+
Projects Completed
3
Counties Served
100%
Licensed & Insured
Dark bronze aluminum pool enclosure interior with curved pool and paver deck overlooking wide waterfront canal with docks, palm trees and luxury homes — AB Aluminum & ScreensPool cage with patio screen room attached South Florida — AB Aluminum & ScreensDark bronze aluminum pool screen enclosure with gable roof, screened pool area, paver deck, South Florida residential installation — AB Aluminum & ScreensScreened pool enclosure with patio area South Florida — AB Aluminum & Screens

Pool Enclosure Styles We Build

We engineer every cage to your pool, deck and home — in the profile that fits your space:

  • Mansard — the flat-top profile most common in South Florida; clean lines and generous headroom
  • Hip — sloped sides that meet at a peak; structurally efficient and low-profile
  • Gable — pitched roof for taller pool areas or two-story homes that need clearance
  • Dome — specialty profile for larger pools and feature areas
Pool screen enclosure side entry door installation South Florida — AB Aluminum & Screens

Screen Mesh Options

The right mesh depends on where you live and how you use the space:

  • Standard 18×14 fiberglass — the all-purpose choice for most South Florida homes
  • No-see-um mesh — tighter weave for canal-front and coastal areas with sandflies
  • Pet-resistant mesh — stands up to claws and lean-against pressure
  • Hurricane-rated specialty fabrics — added protection for storm-exposed coastlines
White aluminum pool enclosure frame installation — AB Aluminum & Screens
Aluminum louvered pergola beside a pool in South Florida
Gallery

Recent Projects from Miami-Dade, Broward & Palm Beach

Browse completed pool enclosures across Sunny Isles Beach and the surrounding barrier island, from flat screen roofs on Golden Shores canal homes to dome and mansard styles on larger Intracoastal-facing decks — each built with marine-grade aluminum and Miami-Dade NOA-rated screening.

Why AB Aluminum & Screens

Why South Florida Homeowners Choose Us

One licensed local team handling design, permits and installation — built to last in the South Florida climate.

  • Licensed & Insured

    A fully licensed, insured Florida contractor — your project and property are protected end to end.

  • Built to Miami-Dade HVHZ Code

    Engineered and permitted for South Florida hurricane-force winds and the Florida Building Code.

  • In-House Crew

    No subcontractors. The same team designs, engineers and installs every project.

  • Free 3D Design

    See a realistic 3D rendering and a clear quote before anything is built — at no cost.

  • 15+ Years of Experience

    Hundreds of pergolas, enclosures and screen rooms installed across the tri-county area.

  • Financing Available

    Build now and pay over time with flexible monthly plans through Synchrony Bank.

Our Process

Our 3-Step Process: Consultation, 3D Design, Installation

  1. 01

    Free Consultation

    We visit your property, take measurements and learn how you want to use the space.

  2. 02

    Custom 3D Design

    You see a realistic 3D rendering and a clear quote before anything is built.

  3. 03

    Permits & Installation

    We pull the permits and our licensed crew installs to Florida Building Code.

Aluminum patio cover beside a pool with palm trees in South Florida
Financing

Financing for your outdoor living project through Synchrony Bank

Build now and pay over time with flexible monthly payments and no upfront cost. Fast approval through our trusted partner, Synchrony Bank.

Learn about financing
Reviews & Testimonials

What our clients say about our work!

4.9 Based on Google reviews
From the 3D design to the final install, the team was professional and on time. Our aluminum pergola completely transformed the backyard.
Maria G. Pinecrest, FL
They handled the permits and HOA approval for us. The louvered roof is built like a tank and looks incredible.
David R. Weston, FL
Our pool screen enclosure is exactly what we wanted — no more bugs and easy to maintain. Highly recommend AB Aluminum.
Jennifer M. Coral Gables, FL

Frequently Asked Questions

Do I need a permit for a pool enclosure in Sunny Isles Beach?

Yes. Any permanent aluminum pool enclosure requires a building permit, sealed engineering, and product approval under Miami-Dade NOA, since the city sits in the High-Velocity Hurricane Zone and structures must be rated to 175 mph winds. Because Sunny Isles Beach is incorporated, the permit is filed with the city's own building department rather than Miami-Dade RER — we prepare and submit the full package.

What screen mesh holds up best on a barrier island like Sunny Isles Beach?

Standard 18x14 mesh works fine for general bug control, but with open water on both the Atlantic and Intracoastal sides, no-see-ums are more persistent here than inland. Most Sunny Isles Beach homeowners upgrade to super-screen or pet-resistant mesh, and we always spec marine-grade powder-coated aluminum framing so salt spray doesn't pit or corrode the structure over time.

Can you rescreen an existing pool cage instead of building a new one?

Often, yes. If the aluminum frame is sound and up to code, we can pull the old screen and rescreen with a heavier or no-see-um mesh for a fraction of the cost of a new enclosure. If salt air has weakened the frame or it predates current HVHZ standards, we'll recommend a full rebuild instead — our free 3D design visit tells you which situation you're in.

Does a screen enclosure meet Florida's pool child-safety barrier code?

A properly latched, self-closing screen enclosure with locking doors can serve as a recognized barrier layer under Florida's pool safety requirements, in addition to protecting swimmers from sun and insects. We build in code-compliant screen doors with self-closing hardware so the enclosure works as both a living-space upgrade and a safety layer for kids and pets.

Get your free 3D design & estimate

Let's talk about your outdoor project — no obligation, usually a response within 24 hours.

Get Your Free 3D Design & Quote

Tell us about your project and we’ll get back to you within 24 hours.

  • Licensed & Insured
  • 15+ Years
  • 500+ Projects
  • Google Reviews
  • Aluminum pool screen enclosure in South Florida
  • Aluminum pool screen enclosure in South Florida
  • Aluminum pool screen enclosure in South Florida
Get a Free Quote

No obligation · Free 3D design · Financing via Synchrony Bank

(786) 383-6066 EN · (786) 340-5157 ES