Custom aluminum pergola shading a waterfront patio in Lantana, Florida
Serving Lantana, FL

Aluminum Pergolas in Lantana

From Hypoluxo Island's waterfront to the cottages off Ocean Avenue, Lantana living happens outdoors. We design, engineer, permit, and install custom aluminum pergolas built to shrug off salt air and stand up to Palm Beach County's coastal winds.

  • Licensed & Insured
  • Financing Available
  • 15+ Years
  • Free 3D Design
  • Miami-Dade HVHZ Approved
Aluminum Pergolas in Lantana, Palm Beach — AB Aluminum & Screens

How much does an aluminum pergola cost in Lantana, FL?

In Lantana, a custom aluminum pergola typically runs $8,700–$11,700 installed, or roughly $30/sq ft. Your price depends on footprint, roof choice — open-lattice, solid insulated, or motorized louvered — and site conditions. AB Aluminum includes sealed engineering, Florida Product Approval, and permitting, plus a free 3D design and financing options.

  • from $30/sq ft installed
  • 140–170 mph wind-borne debris
  • 2–4 wks typical build
  • Free 3D design

Custom Aluminum Pergola Builders Serving Lantana, FL

Neighborhoods we serve: Hypoluxo Island · Downtown Lantana · Ocean Avenue · Water Tower Commons · Maddock Park · Lantana Nature Preserve

Lantana sits right on the Lake Worth Lagoon, and homes from Hypoluxo Island to the streets near the Old Key Lime House take a steady dose of salt air off the Intracoastal and the Atlantic. That corrosion is exactly what kills wood and untreated metal. Our pergolas start with marine-grade aluminum and finish with a powder coat that resists pitting and chalking, so your structure keeps its clean lines season after salty season.

Every backyard is different, so we build to yours. Choose an open-lattice roof for filtered light over a garden patio, a solid insulated panel that keeps a poolside lounge usable through August downpours, or a motorized louvered top you can tilt from open sky to full shade as the afternoon sun swings over the lagoon. A free 3D design lets you see the finished pergola on your home before a single post goes in.

Because Lantana is a coastal Palm Beach County community, a permanent pergola isn't a weekend project — it needs sealed engineering, Florida Product Approval, and a permit before work begins. Our in-house crew handles that whole path, engineering every structure to Miami-Dade HVHZ standards, the strictest wind ratings in Florida and well beyond what local code requires. With 15+ years and 500+ South Florida projects, we permit, build, and stand behind it.

Most Lantana pergola projects run $8,700–$11,700 installed, or about $30/sq ft, depending on size, roof style, and whether you add motorized louvers. Financing is available, and your free 3D design comes with a firm written quote.

Permits & engineering

In Lantana, permanent aluminum pergolas are permitted through the Town of Lantana Development Services Department, with structural review under the Florida Building Code and Palm Beach County's Wind-Borne Debris Region rules (design winds near 175 mph along the coast). We engineer to Miami-Dade HVHZ product-approval standards and pull the permit for you.

We've built aluminum pergolas across coastal Palm Beach County — from waterfront lots on Hypoluxo Island to patios near Ocean Avenue — so we know Lantana's salt exposure, lot setbacks, and permit process firsthand.

15+
Years of Experience
500+
Projects Completed
3
Counties Served
100%
Licensed & Insured
Pergolas project — AB Aluminum & ScreensPergolas project — AB Aluminum & ScreensPergolas project — AB Aluminum & ScreensPergolas project — AB Aluminum & Screens

Pergola & Patio Cover Styles We Build

We design each structure to your home and how you want to use the space:

  • Attached — anchored to the home and engineered to the wall structure; best for patios right off the back of the house
  • Freestanding — stand-alone structures that anchor a pool deck, outdoor kitchen or seating area
  • Louvered (motorized) — adjustable aluminum slats that open for sun and close for rain
  • Bioclimatic / bladed — rotating louvers with smart controls and integrated drainage
White aluminum open-lattice pergola attached to Mediterranean South Florida home with arched window, terracotta tile roof, lush tropical backyard — AB Aluminum & Screens

Why Aluminum Beats Wood & Vinyl in South Florida

South Florida’s humidity, salt air and UV are hard on outdoor structures. Powder-coated aluminum holds up where other materials don’t:

  • No rot or termites — unlike wood, aluminum won’t feed pests or break down in humidity
  • No warping or fading — holds its shape and finish under Florida UV, where vinyl discolors
  • No annual upkeep — no staining or sealing; just an occasional rinse
  • Engineered strength — a structural backbone we can rate to local wind loads
Pergolas project — AB Aluminum & Screens
Aluminum louvered pergola beside a pool in South Florida
Gallery

Recent Projects from Miami-Dade, Broward & Palm Beach

Browse recent aluminum pergola projects from around Lantana and coastal Palm Beach County — open-lattice covers over garden patios, solid insulated roofs shading poolside lounges, and motorized louvered structures on Intracoastal-facing decks. Each one is powder-coated marine-grade aluminum, custom-sized to the home, and engineered to Miami-Dade HVHZ standards. Use these as inspiration, then book a free 3D design to see your own.

Why AB Aluminum & Screens

Why South Florida Homeowners Choose Us

One licensed local team handling design, permits and installation — built to last in the South Florida climate.

  • Licensed & Insured

    A fully licensed, insured Florida contractor — your project and property are protected end to end.

  • Built to Miami-Dade HVHZ Code

    Engineered and permitted for South Florida hurricane-force winds and the Florida Building Code.

  • In-House Crew

    No subcontractors. The same team designs, engineers and installs every project.

  • Free 3D Design

    See a realistic 3D rendering and a clear quote before anything is built — at no cost.

  • 15+ Years of Experience

    Hundreds of pergolas, enclosures and screen rooms installed across the tri-county area.

  • Financing Available

    Build now and pay over time with flexible monthly plans through Synchrony Bank.

Our Process

Our 3-Step Process: Consultation, 3D Design, Installation

  1. 01

    Free Consultation

    We visit your property, take measurements and learn how you want to use the space.

  2. 02

    Custom 3D Design

    You see a realistic 3D rendering and a clear quote before anything is built.

  3. 03

    Permits & Installation

    We pull the permits and our licensed crew installs to Florida Building Code.

Aluminum patio cover beside a pool with palm trees in South Florida
Financing

Financing for your outdoor living project through Synchrony Bank

Build now and pay over time with flexible monthly payments and no upfront cost. Fast approval through our trusted partner, Synchrony Bank.

Learn about financing
Reviews & Testimonials

What our clients say about our work!

4.9 Based on Google reviews
From the 3D design to the final install, the team was professional and on time. Our aluminum pergola completely transformed the backyard.
Maria G. Pinecrest, FL
They handled the permits and HOA approval for us. The louvered roof is built like a tank and looks incredible.
David R. Weston, FL
Our pool screen enclosure is exactly what we wanted — no more bugs and easy to maintain. Highly recommend AB Aluminum.
Jennifer M. Coral Gables, FL

Frequently Asked Questions

Do I need a permit for a pergola in Lantana?

Yes. A permanent aluminum pergola requires a building permit from the Town of Lantana Development Services Department, along with sealed engineering and Florida Product Approval. AB Aluminum prepares the drawings, submits the application, and manages inspections so the whole permitting process is handled for you.

Is aluminum a good choice this close to the Intracoastal?

It's the right choice. Homes near the Lake Worth Lagoon and Hypoluxo Island face constant salt air that corrodes wood and steel. Our marine-grade aluminum with a powder-coat finish resists rust, pitting, and chalking, making it far better suited to Lantana's coastal environment than timber or basic metal.

Will the pergola hold up in a Palm Beach County storm?

Yes. Palm Beach County sits in a Wind-Borne Debris Region with design winds near 175 mph along the coast. We engineer every Lantana pergola to Miami-Dade HVHZ product standards — the toughest in Florida — so your structure exceeds local wind-load requirements with room to spare.

What roof styles can I choose, and how long does it take?

You can pick an open-lattice, solid insulated, or motorized louvered roof to match how you use the space. After your free 3D design and approval, most projects move from permit to finished install in a few weeks, depending on the town's review timeline.

Get your free 3D design & estimate

Let's talk about your outdoor project — no obligation, usually a response within 24 hours.

Get Your Free 3D Design & Quote

Tell us about your project and we’ll get back to you within 24 hours.

  • Licensed & Insured
  • 15+ Years
  • 500+ Projects
  • Google Reviews
  • Custom aluminum pergola & patio cover in South Florida
  • Custom aluminum pergola & patio cover in South Florida
  • Custom aluminum pergola & patio cover in South Florida
Get a Free Quote

No obligation · Free 3D design · Financing via Synchrony Bank

(786) 383-6066 EN · (786) 340-5157 ES