Patio Screen Enclosures in Cutler Bay, FL
Enclose your Cutler Bay lanai or patio with a custom aluminum screen system built for bug-free, shaded living near Biscayne Bay. HVHZ-rated, permitted, and installed by our in-house crew — from Lakes by the Bay to Black Point.
- Licensed & Insured
- Financing Available
- 15+ Years
- Free 3D Design
- Miami-Dade HVHZ Approved
Can I enclose my existing covered patio in Cutler Bay with a screen system?
Yes. Most Cutler Bay screen enclosures attach directly to an existing covered patio, lanai, or under-truss area, using your current roofline or a new self-supporting frame. We handle the sealed engineering, Miami-Dade NOA approval, and permit through the Town of Cutler Bay so the finished structure meets 175 mph HVHZ wind standards.
- from $22/sq ft installed
- 175 mph HVHZ wind-rated
- 2–4 wks typical build
- Free 3D design
Screen Enclosures Built for Cutler Bay's Bay-Front Living
Neighborhoods we serve: Lakes by the Bay · Cutler Ridge · Black Point Marina / Old Cutler Bay · Southwood
Cutler Bay sits directly on Biscayne Bay, and homes near Black Point Marina and the Old Cutler Bay waterfront take a steady beating from salt spray carried in off the water. Standard screen frames pit and corrode within a few seasons out here. We build every enclosure from powder-coated marine-grade aluminum engineered to shrug off salt air, so your screened lanai stays rust-free and structurally sound whether you're a block from the bay or backing up to a canal.
Move a bit inland to Lakes by the Bay or the established streets of Cutler Ridge and the challenge shifts from salt to sun — South Florida's UV load fades furniture and turns an open patio into an unusable oven by early afternoon. A screened enclosure cuts glare and heat while keeping the breeze, and because much of Cutler Bay falls under HOA architectural review, our free 3D design lets you get board approval sorted before a single post goes in the ground.
Whatever the mesh — standard fiberglass for everyday bug protection, no-see-um weave for the fine biting insects that thrive near the bay, or solar/privacy screen along a fence line — every Cutler Bay enclosure is engineered to the 175 mph HVHZ wind standard required in Miami-Dade, with a sealed permit set and Notice of Acceptance product approval we handle from application through final inspection. Financing is available, and many Florida-room conversions start as a screen enclosure first.
Most Cutler Bay screen enclosures run $3,700–$5,100, with framing and mesh typically priced at $22/sq ft; your free 3D design includes an exact quote for your patio or lanai.
Permits & engineering
Cutler Bay enclosures are permitted through the Town of Cutler Bay Building Division, which enforces Miami-Dade County's HVHZ code — sealed engineering and NOA product approval are required before work begins, and we manage the entire process for you.
We've built and permitted screen enclosures throughout Cutler Bay's coastal and inland neighborhoods alike, part of our 500+ South Florida projects over 15+ years, all backed by our licensed, insured, in-house crew.
Screen Room Styles We Build
We design each screen room to your home and how you want to use the space:
- Lanai — roofed, partially enclosed outdoor room; the most common South Florida configuration.
- Wrap-around — runs along multiple sides of the home for larger covered footprints.
- Attached porch enclosure — encloses an existing porch with screen panels and a structural aluminum frame.
- Pool-side screen room — connects your living space to the pool deck while keeping insects out.
Screen Mesh Options
The right mesh depends on where you live and how you use the space:
- Standard 18×14 fiberglass — the all-purpose choice for most South Florida patios.
- No-see-um mesh — tighter weave for canal-front and coastal areas with sandflies.
- Pet-resistant mesh — stands up to claws and lean-against pressure.
- Privacy / solar mesh — reduces visibility and heat on exposed patios.
Recent Projects from Miami-Dade, Broward & Palm Beach
Browse Cutler Bay screen enclosure projects from waterfront lanais near Black Point Marina to shaded family patios in Lakes by the Bay — each built with powder-coated aluminum framing and mesh selected for its exposure to sun, salt, or both.
Why South Florida Homeowners Choose Us
One licensed local team handling design, permits and installation — built to last in the South Florida climate.
-
Licensed & Insured
A fully licensed, insured Florida contractor — your project and property are protected end to end.
-
Built to Miami-Dade HVHZ Code
Engineered and permitted for South Florida hurricane-force winds and the Florida Building Code.
-
In-House Crew
No subcontractors. The same team designs, engineers and installs every project.
-
Free 3D Design
See a realistic 3D rendering and a clear quote before anything is built — at no cost.
-
15+ Years of Experience
Hundreds of pergolas, enclosures and screen rooms installed across the tri-county area.
-
Financing Available
Build now and pay over time with flexible monthly plans through Synchrony Bank.
Our 3-Step Process: Consultation, 3D Design, Installation
- 01
Free Consultation
We visit your property, take measurements and learn how you want to use the space.
- 02
Custom 3D Design
You see a realistic 3D rendering and a clear quote before anything is built.
- 03
Permits & Installation
We pull the permits and our licensed crew installs to Florida Building Code.
Financing for your outdoor living project through Synchrony Bank
Build now and pay over time with flexible monthly payments and no upfront cost. Fast approval through our trusted partner, Synchrony Bank.
Learn about financingWhat our clients say about our work!
From the 3D design to the final install, the team was professional and on time. Our aluminum pergola completely transformed the backyard.
They handled the permits and HOA approval for us. The louvered roof is built like a tank and looks incredible.
Our pool screen enclosure is exactly what we wanted — no more bugs and easy to maintain. Highly recommend AB Aluminum.
Patio Screens in Nearby Areas
Other Services in Cutler Bay
Frequently Asked Questions
Do I need a permit for a patio screen enclosure in Cutler Bay?
Yes. Any permanent aluminum screen enclosure in Cutler Bay requires a building permit through the Town of Cutler Bay, sealed engineering, and Miami-Dade County NOA product approval, since the town falls under Miami-Dade's High-Velocity Hurricane Zone code. We prepare and file the full permit package for you.
What screen mesh options are available for a Cutler Bay enclosure?
We offer standard fiberglass mesh for everyday bug protection, fine no-see-um mesh for smaller biting insects common near Biscayne Bay, solar mesh that blocks glare and heat, and privacy mesh for pool decks or pet containment — all set in powder-coated marine-grade aluminum framing.
Are Cutler Bay screen enclosures built to hurricane standards?
Every enclosure we install in Cutler Bay is engineered to the 175 mph HVHZ wind rating required throughout Miami-Dade County, with sealed engineering and Notice of Acceptance approval on every component — from the aluminum framing to the screen fasteners and door hardware.
Can I convert my Cutler Bay screen enclosure into a Florida room later?
Often, yes. Many Cutler Bay homeowners start with a screened lanai and later upgrade to a glass or acrylic-paneled Florida room using the same aluminum frame. We design the initial structure with that future conversion in mind whenever it's part of your plan.
Get your free 3D design & estimate
Let's talk about your outdoor project — no obligation, usually a response within 24 hours.
Get Your Free 3D Design & Quote
Tell us about your project and we’ll get back to you within 24 hours.
- Licensed & Insured
- 15+ Years
- 500+ Projects
- Google Reviews
No obligation · Free 3D design · Financing via Synchrony Bank